2007 XC90 3.2 windshield washer fluid reservoir removal

[nyc1836]

I have  leaking windshield washer fluid reservoir on my 2007 XC90 3.2 .I want to replace it .Do I have to remove the bumper wheel well etc? I could not find any videos

any help appreciated
Thanks

[RickHaleParker]

Removal:

• 1. Detach the right side of the bumper cover.
  2. Remove the screw for the fuel filler pipe.
  3. Pull up the fuel filler pipe.
  4. Disconnect the 3 hoses at the washer motors. Mark up the hoses.
  5. Drain or plug the windshield washer reservoir.
  6. Disconnect the connectors.
  7. Remove the 3 screws.
  8. Push the bumper cover to one side.
  9. Pull down the windshield washer reservoir.

Install reverse the above order.