Okay, I think I can find the carbs here at the house. I need to make gaskets - can't find them to buy. Rest of car is in storage.
volvlolugnut
There are only crickets in here...
-
volvolugnut
- Posts: 6225
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
Re: There are only crickets in here...
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
volvolugnut
- Posts: 6225
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
Very good, I did not know about them. Not surprising though. Edmond (North side of Oklahoma City) is maybe the capital of Volvo interest in OK.BlackBart wrote: ↑26 Mar 2020, 13:12 Just saw this.... Volvo Salvage in OK.
viewtopic.php?f=9&t=93412
Today, I found the PV544 carb, and gasket material and hole punches. First 544 activity in years. Tag- your it.
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
volvolugnut
- Posts: 6225
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
No, I found one of the SU carbs. Pretty sure the other carb is in storage building.
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
BlackBart
- Posts: 6492
- Joined: 10 December 2016
- Year and Model: 2004 XC70 BlackBetty
- Location: Over the far far mountains
- Has thanked: 927 times
- Been thanked: 884 times
Just kidding.
Found mine. Years of body shop dust and grime. Now I need to learn how to rebuild them. I actually only pulled them to get to the front suspension bolts on the right side. But they've been sitting so many years, they're probably gunked up.
Found mine. Years of body shop dust and grime. Now I need to learn how to rebuild them. I actually only pulled them to get to the front suspension bolts on the right side. But they've been sitting so many years, they're probably gunked up.
ex-1984 245T wagon
1994 850T5 wagon
2004 XC70 wagon BlackBetty
1994 850T5 wagon
2004 XC70 wagon BlackBetty
-
volvolugnut
- Posts: 6225
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
Looks like those Webers are missing a few bolts and cover plates. The internet knows all about these. On closer inspection of my SU carb, the choke linkage has lots of slop in the pivot points. Thinking I may fill the holes with epoxy mix and drill out to proper pin size. These linkage levers are cast brass and look really cool.
volvolugnut
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
BlackBart
- Posts: 6492
- Joined: 10 December 2016
- Year and Model: 2004 XC70 BlackBetty
- Location: Over the far far mountains
- Has thanked: 927 times
- Been thanked: 884 times
Some actual progress!! Moved the other car out, the lawn mower, the shop vac, a transmission, and dug all this out.
It's a bit like reconstructing a crime scene. As I sorted through parts and pieces, I realized I had started to refurbish some of the bits, painted some, had some new bushings pressed in. So it's taking a while to verify what's old and what's new! I made notes on disassembly, and put stacks of washers and nuts on zip ties so the order is right, made some sketches. Lifesavers!
New bushings in lower A arms. New ball joint.
Old upper control arm and new adjustable control arm.
On this used upright I bought, which I obviously cleaned up and painted, I had a "speedi-sleeve" installed over a groove in the oil seal surface. I found later model 70's uprights and front hubs, which carry bigger Ate calipers. I'm changing the braking system from Dunlop to Ate, which includes swapping the rear axle.
I had to get at least one piece assembled so I felt like I was getting somewhere!
It's a bit like reconstructing a crime scene. As I sorted through parts and pieces, I realized I had started to refurbish some of the bits, painted some, had some new bushings pressed in. So it's taking a while to verify what's old and what's new! I made notes on disassembly, and put stacks of washers and nuts on zip ties so the order is right, made some sketches. Lifesavers!
New bushings in lower A arms. New ball joint.
Old upper control arm and new adjustable control arm.
On this used upright I bought, which I obviously cleaned up and painted, I had a "speedi-sleeve" installed over a groove in the oil seal surface. I found later model 70's uprights and front hubs, which carry bigger Ate calipers. I'm changing the braking system from Dunlop to Ate, which includes swapping the rear axle.
I had to get at least one piece assembled so I felt like I was getting somewhere!
Last edited by BlackBart on 28 Mar 2020, 22:12, edited 1 time in total.
ex-1984 245T wagon
1994 850T5 wagon
2004 XC70 wagon BlackBetty
1994 850T5 wagon
2004 XC70 wagon BlackBetty
-
BlackBart
- Posts: 6492
- Joined: 10 December 2016
- Year and Model: 2004 XC70 BlackBetty
- Location: Over the far far mountains
- Has thanked: 927 times
- Been thanked: 884 times
- 700.3a7eb452768d7fb334c8cd3086134bdf.jpg (166.81 KiB) Viewed 605 times
- EVDH 122 meese.jpeg (136.93 KiB) Viewed 605 times
- Volvo PV444 Brochure 1957 EN.jpg (149.97 KiB) Viewed 605 times
- Volvo PV444 Brochure 1957 EN-1.jpg (114.76 KiB) Viewed 605 times
- Volvo NYer comic.jpg (76.5 KiB) Viewed 605 times
- business-commerce-media-television-volvo-product_recall-rudder-bron2051_low.jpg (80.42 KiB) Viewed 605 times
ex-1984 245T wagon
1994 850T5 wagon
2004 XC70 wagon BlackBetty
1994 850T5 wagon
2004 XC70 wagon BlackBetty
-
- Similar Topics
- Replies
- Views
- Last post