ABS, DTSC module resofting after replacement

bogdanp · Post by **bogdanp** » 30 Mar 2020, 11:40

My ABS, DTSC module has been changed and I've been instructed that it needs to be resofted. Anyone has the possibility to do it remotely?

Post by **yagger** » 30 Mar 2020, 12:21

Yes, if you have a DiCE.

wanderdüne · Post by **wanderdüne** » 30 Mar 2020, 17:13

bogdanp wrote: 30 Mar 2020, 11:40 My ABS, DTSC module has been changed and I've been instructed that it needs to be resofted. Anyone has the possibility to do it remotely?

I do not think that you can program with Volvo software a replacement module unless it is a new part from Volvo. If it is a new module, you can download the software from Volvo and install using VIDA/DiCE. Otherwise, if you still have your old module, perhaps you can find help here: https://xemodex.com/us/diagnostic-flow-charts/ This is a trusted source.

I know with DTSC, the only thing xeMODex can do is repair and return to you your old module, which is programmed to your XC90.

Note that xeMODex does remote diagnostics, including internationally. Click on the REMOTE DIAGNOSTICS tab for information. This is not programming, though.

Also, look under TECHNICAL RESOURCES at the flow charts that pertain to your XC90 and see if that helps.

bogdanp · Post by **bogdanp** » 30 Mar 2020, 23:04

yagger wrote: 30 Mar 2020, 12:21 Yes, if you have a DiCE.

Yes, I do have one but is not original, can you help me?

Post by **yagger** » 31 Mar 2020, 10:38

Read PM pls.

Post by **yagger** » 31 Mar 2020, 10:50

Also, one additional question, do we talk about car from your profile? (Year and Model: XC90 2007)