Corona bench tear down, autopsy of,a 1999 9171703 AC compressor

850oldschool · Post by **850oldschool** » 29 Apr 2020, 18:49

Do you have much history on this one? Is that scuffed up swash plate just normal wear and tear after 100,00 miles?

Post by **abscate** » 29 Apr 2020, 19:43

200,000 on that one. It also had about 3-4 years of no AC due to leak so it probably got some contamination too.

Post by **RickHaleParker** » 29 Apr 2020, 19:47

abscate wrote: ↑28 Apr 2020, 20:00 That front seal is the hard to find/ expensive part.

1/4 the cost of a new compressor

DKS15CH is the Zexel model number. Use DKS15CH to search for parts. You can find Santech parts for a lot less.
DKS15CH uses the same front seal as DKS13G & DKS15BH.

Post by **abscate** » 29 Apr 2020, 19:54

From Johnica.com in Taiwan

I wonder what these cost in low quantity? I could refurbish this 1999 2000 AC for under $50 it’s worth more than a junkyard one.

Post by **RickHaleParker** » 29 Apr 2020, 20:10

Front seal is Santech MT2043 you can get one at Autozone for $12.99.

850oldschool · Post by **850oldschool** » 30 Apr 2020, 10:35

I’d buy a few swash plates, if there’s a minimum order from Taiwan.

Post by **abscate** » 30 Apr 2020, 10:51

850oldschool wrote: ↑30 Apr 2020, 10:35 I’d buy a few swash plates, if there’s a minimum order from Taiwan.

I’ve sent an email to Taiwan to see their distribution model

I have another AC compressor which is growly that I can recondition

I think sharing shipping costs will be the key. It’s about $100 to bring an small package from Taiwan to US

Corona bench tear down, autopsy of,a 1999 9171703 AC compressor

Re: Corona bench tear down, autopsy of,a 1999 9171703 AC compressor