Should I bother

User avatar
FLXC90
Posts: 1132
Joined: 18 Aug 2014, 22:31
Year and Model: 98 V70 T5
Location: Florida Panhandle
Has thanked: 16 times
Been thanked: 45 times

Post by FLXC90 »

so dry readings are 100-110-150x3?
Current Volvos:
1998 V70 T5, 112k sat 5 years, still in mechanical coma (finally at the top of the pile )
2004 XC90 T6 AWD: 186k, 60 on transaxle ( traded in )
1998 POS70 N/A: DD/training aid, 236k but really about 240k, I think...ABS module( passed on to son who sold it)

User avatar
Sveedy
Posts: 2139
Joined: 11 Nov 2019, 23:52
Year and Model: 96 850 Turbo
Location: N. Arizona
Has thanked: 445 times
Been thanked: 479 times

Post by Sveedy »

FLXC90 wrote: 09 Aug 2020, 02:18 so dry readings are 100-110-150x3?
That's about right. 1 and 2 are low. That's why I was going the head gasket route, thinking maybe a leak between them. But with the wet test raising the psi 30lbs I figure I've got bigger issues.
Try to learn life's bad lessons vicariously through others.


1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT

wheelsup
Posts: 1299
Joined: 29 Jun 2005, 02:30
Year and Model:
Location: Raleigh, NC
Has thanked: 16 times
Been thanked: 22 times

Post by wheelsup »

Just do what I did. Buy some heater hose from Advance or Autozone and attach it to the dipstick tube and route it underneath the car. I store the dipstick on the drivers side hood area. Can post a pick if you want, but it slides right in between the stuff under the hood and the LF fender.

It'll relieve all the pressure you need, and stop even the worst RMS leaks for the most part.

A qt per 3000 miles is nothing...my wife had a VW that burned a qt evert 800 or so. Nice thing is you never had to do an oil change...it changed itself. The pressure test on it was similar to yours - the right side of the motor was very weak and the left/center more normal. It wasn't a HG.

If it's not visible you're fine. It's an old car, personally I wouldn't rebuild the motor on it unless the car itself was in pristine condition.

If you're not losing any coolant, chalk it up to wear and tear on the motor and run it until it won't run any more. Just don't do what a kid did to a car I bought from him - the oil light came on and he ignored it. $250 for the car gave me a nice transmission!
1995 850 GLT Wagon w/ 200,000 miles

User avatar
Sveedy
Posts: 2139
Joined: 11 Nov 2019, 23:52
Year and Model: 96 850 Turbo
Location: N. Arizona
Has thanked: 445 times
Been thanked: 479 times

Post by Sveedy »

I tried the hose from the dipstick with an old style pcv valve in the end. Could not believe the amount of oil that ended up under the car and the on the garage floor. So yes I'm doing the pcv upgrade tomorrow/ Monday.
The car is in as close to pristine condition as any I've ever seen. Rust free AZ car that has always been garage kept that I bought from original owner. Still had the original tool kit complete with white cloth gloves. So I do plan on keeping her. :) But I'd sure like to wait on doing a rebuild job if I can.
Try to learn life's bad lessons vicariously through others.


1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT

User avatar
abscate
MVS Moderator
Posts: 36147
Joined: 18 Feb 2013, 00:54
Year and Model: 99: V70s S70s,05 V70
Location: Port Jefferson Long Island NY
Has thanked: 1610 times
Been thanked: 4065 times

Post by abscate »

Put the tube end into a catch can and periodically dump it into the tanks of BMWS parked at the Hooters
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread

Who is online

Users browsing this forum: Ahrefs [Bot], Amazon [Bot], Bing [Bot], DennisCA, Google [Bot] and 43 guests