Hail Damage - DIY or body shop Topic is solved

Post by **xHeart** » 08 Apr 2020, 06:27

What to look for when insurance covers the hail damage? What DIY tools are available to DIY?

Post by **xHeart** » 10 Apr 2020, 16:54

There are many, here is a sample:

: MVS_V70XC_0271.jpg (151.59 KiB) Viewed 1646 times

Post by **RickHaleParker** » 11 Apr 2020, 04:41

My neighbor who grew up in a body shop would go at it from the back side. Just keep in mind the key is to nudge it a little at a time. Never try to do it fast in one or two pushes. You do not pop dents out. You nudge the metal back to where it should be.

There are no short cuts. No magic spells. Just a lot of elbow grease, persistence, patience, and attention to detail. That is why body work guys get the big bucks.

Post by **xHeart** » 12 Apr 2020, 10:09

This DIY feels overwhelming over a finished surface. It appears, there are fewer at MVS with hail damage/repair know how.
I may check-in with a local body shop for their assessment and cost to restore it.

Post by **RickHaleParker** » 12 Apr 2020, 10:39

xHeart wrote: ↑12 Apr 2020, 10:09 This DIY feels overwhelming over a finished surface. It appears, there are fewer at MVS with hail damage/repair know how.

People can give you guidance but none can tell you how to do bodywork. It is an art form not a science.

Post by **volvolugnut** » 12 Apr 2020, 11:38

I received some hail last night and now have some new dents in my 2001 V70. I am not likely to take any action. It already had faded trim and peeling clear coat.
Smaller dents have been known to pop out after hot sun exposure.
volvolugnut

Post by **xHeart** » 15 Aug 2020, 10:15

volvolugnut wrote: ↑12 Apr 2020, 11:38 I received some hail last night and now have some new dents in my 2001 V70. I am not likely to take any action. It already had faded trim and peeling clear coat.
Smaller dents have been known to pop out after hot sun exposure.
volvolugnut

Insurance covered the hail damage, therefore a body shop job.