ABS woes, again

Post by **Clemens** » 22 Oct 2020, 12:31

So for the second or third timw this year the ABS and TRACS light came on. I soldered the module 4 times in the past 5 years and the problem seems to come back.

Since I have a 96 I can't blink out the codes. I know that theoretically wheel sensors, the wiring to the sensors and the ABS rings could really go faulty. But over the years it were mainly the modules. I know the wires to the ABS pump are crappy, but I don't know how the remove the pump.
Now honestly, what xould I do to get that stupid ABS system to stage 0?

Post by **misha** » 22 Oct 2020, 14:08

If you can find serial db9 to OBDII cable(Vag-Com kkl) i can send you Vol-Fcr via email.
Other than that...you can remove and clean out front abs sensors because....since they are magnetic...they can be fouled up with metal debris from pads and rotors.

Post by **Clemens** » 22 Oct 2020, 15:11

I'vw had that cable for a while. I'll pm you my email address. Thanks!