So I finally had a shop look at this car for me. They say no compression on cylinder 1. But I did a compression and leak down test on the car before I ever messed with the timing and everything looked fine. But now i know the timing is off but no compression in just cylinder 1?
Havent checked myself yet but I have no reason not to believe them. Pictures are in the thread.
Pcv, breather box help
-
jonesg
- Posts: 3501
- Joined: 16 January 2008
- Year and Model: 2004 V70
- Location: Northern maine.
- Has thanked: 69 times
- Been thanked: 479 times
No compression or low compression ?
I would try a leak down, apply compressed air to #1, rotate engine by hand to see if it builds pressure when all valves close on that cyl.
That would prove its the timing .
I would try a leak down, apply compressed air to #1, rotate engine by hand to see if it builds pressure when all valves close on that cyl.
That would prove its the timing .
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15 Replies
- 2584 Views
-
Last post by Bluevanacd2005
-
- 5 Replies
- 4035 Views
-
Last post by jamadams11