850 Rear Mounting Bracket

crlwalls · Post by **crlwalls** » 09 Jan 2021, 15:22

I am curious to know if one can change the bolts in the rear license plate mounting bracket. Like could I remove the rear tailgate interior panel and change the bolts from metric to standard or vice versa?

Post by **FLXC90** » 09 Jan 2021, 20:07

For GPs or are your bolts stripped or something? You could change them, but it may not be the best option

Post by **abscate** » 10 Jan 2021, 05:33

You can buy a new plate holder for about $18 from FCP, part 31391626 . IT screws into rubber bushings in the trunk with Torx screws. M6 acorn “stainless “ nuts from Lowe’s or other hardware store work well here

A dab of anti seize helps keep them from rusting up.

I’ve been more sensitive to plate holders since I’ve been shuffling which members of the fleet are registered

( For our UK membersrecoiling in horror, most States here assign plate to registrant, not to the car. It’s yet another reason you have nice things )