This is about 20 minutes of grinding. It was a flat top cylinder when I started. I'm trying to make a deep cut cup, to make it a planter.
Anyone have any concrete grinding tips?
Forum rules
Disallowed: religion, race, politics, war and disrespect toward others.
Allowed: history, science(!), computers, sports, movies, careers, art, music, relationships and the ten million other topics in our lives.
Disallowed: religion, race, politics, war and disrespect toward others.
Allowed: history, science(!), computers, sports, movies, careers, art, music, relationships and the ten million other topics in our lives.
-
matthew1
- Site Admin
- Posts: 14468
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2652 times
- Been thanked: 1243 times
- Contact:
Anyone have any concrete grinding tips?
I have a 4.5" angle grinder and a $8 DeWalt concrete wheel. The going is... slow.
This is about 20 minutes of grinding. It was a flat top cylinder when I started. I'm trying to make a deep cut cup, to make it a planter.
This is about 20 minutes of grinding. It was a flat top cylinder when I started. I'm trying to make a deep cut cup, to make it a planter.
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
-
volvolugnut
- Posts: 6231
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
Wear a good sealing mask. Breathing silicone dust is bad.
It may be better to use carbide tipped drill bits with a hammer drill to get the depth you want. Use about 3/8 bit and use water cooling. Do not let the bit get hot. Make a ring of holes close together but not overlapping- maybe 2 inch diameter. Then use a chisel to break out the rough cylinder. Expect it to take a long time and keep your patience.
volvolugnut
It may be better to use carbide tipped drill bits with a hammer drill to get the depth you want. Use about 3/8 bit and use water cooling. Do not let the bit get hot. Make a ring of holes close together but not overlapping- maybe 2 inch diameter. Then use a chisel to break out the rough cylinder. Expect it to take a long time and keep your patience.
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
matthew1
- Site Admin
- Posts: 14468
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2652 times
- Been thanked: 1243 times
- Contact:
Thanks VLN. I'll do that.
I wore an N95, but I'll get a sealed mask. Thanks!
I wore an N95, but I'll get a sealed mask. Thanks!
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Focus on the journey not the destination and it will be over too soon.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
matthew1
- Site Admin
- Posts: 14468
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2652 times
- Been thanked: 1243 times
- Contact:
Haha, so true.
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
-
Sveedy
- Posts: 2069
- Joined: 11 November 2019
- Year and Model: 96 850 Turbo
- Location: N. Arizona
- Has thanked: 417 times
- Been thanked: 457 times
I think you could pour/cast a new one with the cup formed quicker than what your doing. And you could make a few of them different heights at that point. Looks like a piece of Sonotube with a bowl in the bottom would do quite nicely.
Try to learn life's bad lessons vicariously through others.
1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT
1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT
-
Sveedy
- Posts: 2069
- Joined: 11 November 2019
- Year and Model: 96 850 Turbo
- Location: N. Arizona
- Has thanked: 417 times
- Been thanked: 457 times
It looks like it was the drop from a coring job.
Try to learn life's bad lessons vicariously through others.
1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT
1996 850 Turbo GLH ( Goes Like Hell )
1999 V70 GLT
-
MoVolvos
- Posts: 5273
- Joined: 15 January 2012
- Year and Model: S&V70XC,S60,C30,XC90
- Location: NC
- Has thanked: 310 times
- Been thanked: 524 times
*
Sometimes if you can't win just join. If a little extra height is not an issue. Find or make a round sleeve and pour new concrete to join or surround the bottom piece while forming your ideal shaped upper planter. It will take too long to cut besides not achieving the shape you want.
*
Sometimes if you can't win just join. If a little extra height is not an issue. Find or make a round sleeve and pour new concrete to join or surround the bottom piece while forming your ideal shaped upper planter. It will take too long to cut besides not achieving the shape you want.
*
Blessings,
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
-
MoVolvos
- Posts: 5273
- Joined: 15 January 2012
- Year and Model: S&V70XC,S60,C30,XC90
- Location: NC
- Has thanked: 310 times
- Been thanked: 524 times
And ear protection if you continue to grind. Will appreciated years down the road!
*
Blessings,
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
-
MoVolvos
- Posts: 5273
- Joined: 15 January 2012
- Year and Model: S&V70XC,S60,C30,XC90
- Location: NC
- Has thanked: 310 times
- Been thanked: 524 times
MoVolvos wrote: ↑23 Feb 2021, 22:27 *
Sometimes if you can't win just join. If a little extra height is not an issue. Find or make a round sleeve and pour new concrete to join or surround the bottom piece while forming your ideal shaped upper planter. It will take too long to cut besides not achieving the shape you want.
*
*
Sorry missed that one.
*
Blessings,
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior