k24 oil feed line

wbrenegade420 · Post by **wbrenegade420** » 30 Mar 2021, 22:57

Does anyone know if there is supposed to be a gasket between the oil feed line and the turbo? (area in question circled in yellow)

: g923.png (362.65 KiB) Viewed 969 times

If so, could someone get by using just Aerobic sealant?

Post by **jonesg** » 30 Mar 2021, 23:05

Yes, its a green paper type gasket.
I broke mine installing it, got a new one from a dealership.
Don't know if sealant will work, it might not be machined to the same clearance as the head.

wbrenegade420 · Post by **wbrenegade420** » 30 Mar 2021, 23:08

Ok cool thank you. I put it on without gasket and developed small leak. Looks like Imma need to locate a gasket.

Post by **abscate** » 31 Mar 2021, 03:53

I’ve got some extras. Pm me an address and I’ll pop it in US mail

That will stick it to the shipping cabal.

That’s the oil return line, by the way, and be careful with those screws, they are an oddball size, like M7 with a 6 mm hex head