Quick update: went through two locking pliers on the shaft that would not grip enough despite grinding.
An impact torx bit did a good job with the pass through wrench until it snapped leaving the bit head stuck in the shaft.
Rear shocks top nut
-
toolpusher
- Posts: 52
- Joined: 24 December 2019
- Year and Model: 2007 XC90
- Location: PA
- Has thanked: 3 times
- Been thanked: 3 times
-
volvolugnut
- Posts: 6233
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
I hate when that happens. Time for gas axe (AKA cutting torch)?
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
toolpusher
- Posts: 52
- Joined: 24 December 2019
- Year and Model: 2007 XC90
- Location: PA
- Has thanked: 3 times
- Been thanked: 3 times
I am thinking of drilling into the nut. Start small, get bigger and then blow off the nut with a chisel.
I am afraid I am past drilling the shaft, because now there is a hardened steel bit stuck in it
I am afraid I am past drilling the shaft, because now there is a hardened steel bit stuck in it
-
cn90
- Posts: 8256
- Joined: 31 March 2010
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Has thanked: 4 times
- Been thanked: 471 times
- If you carefully apply heat (propane torch set at low) and point straight to the nut for 1 min, then spray with
PB Blaster and let is soak, then turn it.
- If you mess up the shock mount (the round piece), let me know, I have 2 gently used shock mounts in excellent condition, I can ship them to you.
- If you look at the link I posted above, you will see the vise-grips trick...
PB Blaster and let is soak, then turn it.
- If you mess up the shock mount (the round piece), let me know, I have 2 gently used shock mounts in excellent condition, I can ship them to you.
- If you look at the link I posted above, you will see the vise-grips trick...
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
-
toolpusher
- Posts: 52
- Joined: 24 December 2019
- Year and Model: 2007 XC90
- Location: PA
- Has thanked: 3 times
- Been thanked: 3 times
Yessss, it’s loose. Used a tie down strap to keep the self tightening Knipex in place. Seriously, get one, mine is 20 years old, bites as new.
- Attachments
-
-
-
-
toolpusher
- Posts: 52
- Joined: 24 December 2019
- Year and Model: 2007 XC90
- Location: PA
- Has thanked: 3 times
- Been thanked: 3 times
Hi, Putting it all back together. I asked FCP for the torque specs. According to that sheet the top nut just needs 18 Ft Lb. Is that correct? Seems pretty low.
-
volvolugnut
- Posts: 6233
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
I hate to abuse good tools, but sometimes it is the only way. Glad you got it apart.
volvolugnut
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
toolpusher
- Posts: 52
- Joined: 24 December 2019
- Year and Model: 2007 XC90
- Location: PA
- Has thanked: 3 times
- Been thanked: 3 times
Thank you!
So it is the strut center shaft. I assumed it is the upper shock mounting.
So it is the strut center shaft. I assumed it is the upper shock mounting.
- Attachments
-
- 43839D54-B05A-466B-94DE-DD08FFE242E6.jpeg (189.02 KiB) Viewed 955 times
-
- Similar Topics
- Replies
- Views
- Last post