Pulled fuse for instrument panel

Holdtron88 · Post by **Holdtron88** » 16 Jul 2021, 21:18

I’ve recent acquired a very clean 2002 V70. I was checking the fuses on the panel inside the driver side door. I pulled the wrong one and it was the fuse for the instrument panel. Now I have a srs airbag service urgent and alarm system service urgent code showing up on the dim. Can I reset/ clear this with out a VIDA/DICE. I’ve bought one. Is currently in shipping, just wondering if there is a reset procedure.

Thank You

Post by **jonesg** » 16 Jul 2021, 23:03

I didn't know pulling a fuse could set the SRS, that doesn't sound right.

Holdtron88 · Post by **Holdtron88** » 17 Jul 2021, 00:23

There were no messages on the dim before I pulled the fuse, now 2 messages. Idk I will wait till my new scanner comes in, No airbag light just the message on the DIM.

ignatz · Post by **ignatz** » 17 Jul 2021, 04:36

I've had 4 different 01 to 05 Volvo's. Everyone threw an Alarm service message at some point. All took that module around the front fender. All the cars had different ways or times that would tell me something was wrong with the car. Our last 05 S60 2.5T awd threw the alarm code on the way home after buying it. We pulled over somewhere, locked the car, and the message appeared after unlocking it.
Not sure about your SRS light.

Post by **abscate** » 17 Jul 2021, 13:00

If you deposed the SRS system with the rest of the car powered up, you can setban SRS code which will require VIDA to reset

General rule, any SRS work, disconnect battery

Holdtron88 · Post by **Holdtron88** » 18 Jul 2021, 09:28

Thank you very much for the help, my VIDA will be here in a few days.