Login Register

S80 V8 4.4l overfilled oil

Post Reply
ncbudai
Posts: 5
Joined: 22 Jul 2013, 11:41
Year and Model: 13 XC90, 07 S80 V8
Location: Phoenix

Post by ncbudai »

Hi all. So I ran the car for a couple thousand miles with about 2qt extra oil. Nothing happened, no leaks or anything but should I be worried about impending doom? Is this engine bulletproof and can take some stuff like this?

I just did the oil change and little less than 9 qt came out, and it takes 7 qts according to the books.

User avatar
volvolugnut
Posts: 6503
Joined: 19 Jan 2014, 09:51
Year and Model: 2001 V70
Location: Oklahoma USA
Has thanked: 987 times
Been thanked: 1075 times

Post by volvolugnut »

Normally over filling can cause oil foaming and excess power loss from moving parts churning the oil (called windage). This effect is more likely at high RPM (above normal engine speed).
If you did not notice oil pressure loss warning or overheating, I expect you and the engine are OK.

Others post your opinions.

volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
John Deere 214 lawn tractor about 1977 model
And others.

User avatar
RickHaleParker
Posts: 7203
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 978 times

Post by RickHaleParker »

When you drained the oil, was it bubbly or froth ? ... That is, did it have air bubbles in it?
Air bubbles on the dipstick before you drain the oil?

If no air bubbles, the crankshaft was not dipping into the extra two quarts and you are OK.

Bubbles without any discoloring is overfill where the crankshaft came in contact with the extra oil.


Modern oil has anti-foam additives in it. It takes a adulterate like water for the oil to foam. A discolored foam is water contamination not overfill but .. overfill can cause water contamination foam to become more pronounced.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )

Post Reply
  • Similar Topics
    Replies
    Views
    Last post