Oil Sump (Pan) Pipe

Oka · Post by **Oka** » 12 Oct 2021, 13:42

: OilSumpPipe.jpg (167.02 KiB) Viewed 759 times

Am so pissed. Cleaned the pan and the pipe (arrowed), and now I misplaced it; still looking for it in the garage. I remember cleaning it. Called two wreckers in the lower-48 and they don't have it separately. Anyone know where I can get one?

Cheers

Post by **vtl** » 12 Oct 2021, 13:50

Don't you have local junk yards?

ignatz · Post by **ignatz** » 12 Oct 2021, 17:15

Keep looking. I do this all the time!

Post by **BlackBart** » 12 Oct 2021, 18:43

^ Me too. Keep looking, retrace your steps.

XC70Rider · Post by **XC70Rider** » 13 Oct 2021, 21:55

Keep looking and you'll find it.

I'm in the process of building a 32' x 28' shop. With no garage in this house I got 18 months ago my tools are scattered within utility room, extra bedroom and front porch. Cannot wait to get it completed!

Oka · Post by **Oka** » 15 Oct 2021, 19:14

Yippie!!!
Found the pipe about an hour ago. Shamefully to say it was sitting in plain sight. Wifey and I are dumbfounded how we could have missed it all these days; baffling. Am so excited and now, back to work on the car.

Thanks you all.

Post by **vtl** » 15 Oct 2021, 19:59

How to make a man happy...

TisMe · Post by **TisMe** » 15 Oct 2021, 20:12

Oka wrote: ↑15 Oct 2021, 19:14 Yippie!!!
Found the pipe about an hour ago. Shamefully to say it was sitting in plain sight. Wifey and I are dumbfounded how we could have missed it all these days; baffling. Am so excited and now, back to work on the car.

Thanks you all.

The tool/parts gnomes are at it again... ask me how I know

Post by **RickHaleParker** » 15 Oct 2021, 20:25

ignatz wrote: ↑12 Oct 2021, 17:15 Keep looking. I do this all the time!

Toss the parts in a bright colored plastic tote as you disassemble. Then you just need to locate the bright colored tote to find the part. Same goes for bolts and nuts in a can. Do put the bolt can in the tote so you don't loose track of them all.

TisMe · Post by **TisMe** » 15 Oct 2021, 21:28

RickHaleParker wrote: ↑15 Oct 2021, 20:25
ignatz wrote: ↑12 Oct 2021, 17:15 Keep looking. I do this all the time!
Toss the parts in a bright colored plastic tote as you disassemble. Then you just need to locate the bright colored tote to find the part. Same goes for bolts and nuts in a can. Do put the bolt can in the tote so you don't loose track of them all.

That's too easy, I'd rather degrease my bolts in the bathroom sink and leave them to soak, then immediately go overhaul my PCV and drop my oil pan while I'm busy overloading my short-term memory!

Meanwhile, I might toss a random pan bolt in my oil drain reservoir just for fun. Banjo bolts go in the garbage disposal, just to make sure I order freshies.