Power steering line

Post by **scot850** » 18 Oct 2021, 19:09

Anyone have any idea what the pressure is in the line? I was thinking along the lines of what abscate has suggested. Drain the line if possible and then split a piece of fuel hose of similar dimension to the holed hose and then clamp it as close as possible to the hole with the rubber hose split on the opposite side to the hole. Then clamp 2 hose clamps as close to the hole as possible. Not a permanent fix but may tide you over the winter.

Depending on the pressure in the hose, could a short section of the metal pipe be removed and a reinforced rubber fuel hose installed in place?

Neil.

skloon · Post by **skloon** » 19 Oct 2021, 12:31

hmm never thought of that of course the spot is in a hard to access location

Post by **scot850** » 19 Oct 2021, 15:43

Well where is the fun if it was accessible!? The day I get an accessible job will be the first!

Neil.