A 15 minute video for those of you experiencing ETM woes.
My advice is to get yourself a copy of Vida software and Dice scanning tool and begin scanning your ETM with Potentiometer 1 & 2 Tests through Activations menu in ETM area. First go to Diagnostics tab, then Vehicle Communication, then choose Parameters Tab then double click Throttle Position Sensors 1 & 2 for angle tests.
If you have updated post 2006 software in your ETM you can perform an ETM test as I did here and compare pre and post sensor changes. As you can see in this video it was a very marked and obvious transformation after the new sensor was fitted. Unfortunately not all ETMs respond well to the repair and some need to be refurbished by Volvo (on an exchange basis through most dealers) or through XeModex in Canada.
If you're in Australia I can perform this service for you. Just PM me
Here's the video:
ETM transformation
-
precopster
- Posts: 7543
- Joined: 21 August 2010
- Year and Model: Lots
- Location: Melbourne Australia
- Has thanked: 8 times
- Been thanked: 128 times
-
senator710
- Posts: 1
- Joined: 8 November 2021
- Year and Model: 2001 s80
- Location: ankara
nice video thanks.
-
- Similar Topics
- Replies
- Views
- Last post