It is truly amazing what you can learn here,
volvolugnut
Engine seized
-
volvolugnut
- Posts: 6225
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
Re: Engine seized
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
abscate
- MVS Moderator
- Posts: 35275
- Joined: 17 February 2013
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1500 times
- Been thanked: 3810 times
Almost anything will work, You are just lubing and sealing the rings
Can you turn over by hand ?
Can you turn over by hand ?
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
-
volvolugnut
- Posts: 6225
- Joined: 19 January 2014
- Year and Model: 2001 V70
- Location: Oklahoma USA
- Has thanked: 927 times
- Been thanked: 1000 times
Get some of the famous Marvel Mystery Oil.
volvolugnut
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
And others.
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
5W is light weight for motor oil.
It is not a critical requirement. It is a suggestion to improve the odds of success. The idea is use to something that flows when cold. So that it can get between the cylinder walls and pistons. Something that is runny not thick has a better chance of flowing down between the pistons and cylinder walls.
Would be on the expensive side but, flooding the top of the pistons with Liquid Wrench should work well if this is going to work.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
MMO is 5 wt oil.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
loveMy850
- Posts: 369
- Joined: 8 October 2006
- Year and Model: 1994 850 WAGON
- Location: California
- Has thanked: 97 times
- Been thanked: 4 times
I've been reading up on these,and the seaform sounds promising,I really don't know, I took out the plugs without lubing the plugholes yet and no it's not budging 
-
RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Seafoam is good for getting carbon out and letting stuck rings pop back out. Seafoam is a cleaner not a lubricant.
You need something that might free up the pistons. We are thinking when it got hot the surface between the pistons and cylinder walls went dry and friction is holding it back. If this is the case and you can get some lubricant between the pistons and cylinder walls it might free up and move. That is if the cylinder walls are not damaged.
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
loveMy850
- Posts: 369
- Joined: 8 October 2006
- Year and Model: 1994 850 WAGON
- Location: California
- Has thanked: 97 times
- Been thanked: 4 times
Ok so I will get some lubricant oil next time I'm in town. If I use some 5 w now and it's not a go can I try something different like the marvel? Just curious. I've always kept clean oil and antifreeze in her. I don't understand why she got a hole in the lower radiator hose and blew. There's a reason for that.went ahead and put some 5w in the plug holes will try tomorrow.Thanks guys
-
foggydogg
- Posts: 2948
- Joined: 17 October 2009
- Year and Model: '98 V70 R, 97 850 T5
- Location: District Of Columbia, not one of the Several States
- Has thanked: 83 times
- Been thanked: 402 times
Since this is just a diagnostic experiment, I agree with the others; no need to get too specific here, or spend big money. The secret ingredient in Seafoam - according to the ChemoGeeks over on Bob's - is 'odorless kerosene.' If there is something lightly stuck, that might be enough to help you decide if the motor will spin. Don't put a high volume in any one cylinder; if you do break it loose, what you put in must come out.
If during the overheating sequence a cylinder wall cracked, there could be so much mechanical interference lubrication won't be able to overcome it, and the motor will need to come apart. These engines really don't like to get hot.
If during the overheating sequence a cylinder wall cracked, there could be so much mechanical interference lubrication won't be able to overcome it, and the motor will need to come apart. These engines really don't like to get hot.
69 1800s, @500k Death by Rust
94 850 Turbo, T-boned, ambulance for me, crusher for it
97 855 T5, 855 R projects
98 V70R x2, Silver Junkyard rescue, Coral Red
98 V70GLT x2, parts cars
00 V70xc x2, both now dead
62 122s, gone to live in Richmond
56 445 Duett basket project
1950 Studebaker 2R10 flatbed, T9 crashbox
94 850 Turbo, T-boned, ambulance for me, crusher for it
97 855 T5, 855 R projects
98 V70R x2, Silver Junkyard rescue, Coral Red
98 V70GLT x2, parts cars
00 V70xc x2, both now dead
62 122s, gone to live in Richmond
56 445 Duett basket project
1950 Studebaker 2R10 flatbed, T9 crashbox
-
- Similar Topics
- Replies
- Views
- Last post