88 760 GLE Wiring Schematic needed for radio replacement
-
PeterboroughGLE
- Posts: 3
- Joined: 18 September 2004
- Year and Model:
- Location: Peterborough
88 760 GLE Wiring Schematic needed for radio replacement
I have an 88 760 GLE, and am replacing the factory Tuner/Cassette with a Sony CDX-L510X Tuner/CD. Unfortunately, any searches that I have done to find the wiring schema have been totally off. I am hoping that someone out there has already solved this problem and kept notes... or actually has a schema at hand.[/list]
-
PeterboroughGLE
- Posts: 3
- Joined: 18 September 2004
- Year and Model:
- Location: Peterborough
Here are the wire colours and positions to the connector:
1: Red-White
2: Gray-Red
3: White
4: Grey
5: Orange & Yellow (2 Wires)
6&7: Yellow-White
8: Brown-Black
9: Green-Black
10: Black
11: Yellow-Black
12: Red
13:
14:
The wire mapping from the head unit to the connector:
1: Red/White
2: Gray/Red
3: White
4: Gray
5: Yellow
6: Yellow/White
7: Green
8: Blue
9: Green/Brown
10: Black
11: Yellow/Black
12: Red
13:
14:
This might be easier to answer... I hope...
PeterboroughGLE
[/list]
1: Red-White
2: Gray-Red
3: White
4: Grey
5: Orange & Yellow (2 Wires)
6&7: Yellow-White
8: Brown-Black
9: Green-Black
10: Black
11: Yellow-Black
12: Red
13:
14:
The wire mapping from the head unit to the connector:
1: Red/White
2: Gray/Red
3: White
4: Gray
5: Yellow
6: Yellow/White
7: Green
8: Blue
9: Green/Brown
10: Black
11: Yellow/Black
12: Red
13:
14:
This might be easier to answer... I hope...
PeterboroughGLE
[/list]
Last edited by PeterboroughGLE on 20 Sep 2004, 10:40, edited 1 time in total.
Check your PM and give me a reply
-
PeterboroughGLE
- Posts: 3
- Joined: 18 September 2004
- Year and Model:
- Location: Peterborough
First off, props to the Install Doctor and all who responded to my question.
From the Install Doctor site, I was able to get most of the wiring information. In fact Alpine (The makers of the unit) pretty much were using ISO colors with a few exceptions of course.
So, by cutting off the connector attached to the Head, I've now created my own harness which fits into the adapter socket.
For all that come after me looking for the same damn information, The mapping for an 88 760 GLE is as follows:
1: Red/White LEFT FRONT -
2: Gray/Red RIGHT FRONT -
3: White LEFT FRONT +
4: Gray RIGHT FRONT +
5: Yellow RIGHT REAR +
6: Yellow/White RIGHT REAR -
7: Green LEFT REAR +
8: Blue ANTENNA
9: Green/Brown LEFT REAR -
10: Black GROUND (Duh!!!)
11: Yellow/Black BATTERY
12: Red IGNITION
13:
14:
From the Install Doctor site, I was able to get most of the wiring information. In fact Alpine (The makers of the unit) pretty much were using ISO colors with a few exceptions of course.
So, by cutting off the connector attached to the Head, I've now created my own harness which fits into the adapter socket.
For all that come after me looking for the same damn information, The mapping for an 88 760 GLE is as follows:
1: Red/White LEFT FRONT -
2: Gray/Red RIGHT FRONT -
3: White LEFT FRONT +
4: Gray RIGHT FRONT +
5: Yellow RIGHT REAR +
6: Yellow/White RIGHT REAR -
7: Green LEFT REAR +
8: Blue ANTENNA
9: Green/Brown LEFT REAR -
10: Black GROUND (Duh!!!)
11: Yellow/Black BATTERY
12: Red IGNITION
13:
14:
-
Guest
Great post i joined the forums as i'm new to volvos and wow this is the post i was looking for.
Thanksguys.
Thanksguys.
-
- Similar Topics
- Replies
- Views
- Last post






