Bumping old thread. I’m guessing the rubbery coating is a conformal coating and is removed either mechanically or by softening with heat. I seem to recall solvents are avoided
This is Ricks area of knowledge, for certain.
abs trouble
- abscate
- MVS Moderator
- Posts: 36156
- Joined: 17 Feb 2013, 17:54
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1611 times
- Been thanked: 4072 times
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
- Clemens
- Posts: 1956
- Joined: 03 Sep 2015, 12:34
- Year and Model: 96 855 R + 94 855 T5
- Location: Austria
- Has thanked: 500 times
- Been thanked: 228 times
you can remove it manually where you need to solder.
After my personal saga of soldering the module 3 times over a period of 5 years (worked for 2 years between the 1st and second solder job and then came on and off again) I had MattyMoo fix one for me and I gotta say I should have done that as sion as the module went bad, especially the second time around.
The benefit of getting a repaired unit is that at least you can cross off the module as possible culprit if the ABS light stays on. In my case I was really starting to suspect something different because resoldering brought temporary improvements, but then the abs light came back.
After my personal saga of soldering the module 3 times over a period of 5 years (worked for 2 years between the 1st and second solder job and then came on and off again) I had MattyMoo fix one for me and I gotta say I should have done that as sion as the module went bad, especially the second time around.
The benefit of getting a repaired unit is that at least you can cross off the module as possible culprit if the ABS light stays on. In my case I was really starting to suspect something different because resoldering brought temporary improvements, but then the abs light came back.
1996 855 R,
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
- jreed
- Posts: 1665
- Joined: 08 Mar 2009, 05:43
- Year and Model: '97 Volvo 855 GLT
- Location: RTP, North Carolina
- Has thanked: 384 times
- Been thanked: 221 times
I recently went thru this experience again too, and had MattyMoo repair my once-upon-a-time repaired ABS module. He did a great job, the ABS system is working fine again -- problem solved.
1997 855 GLT (Light Pressure Turbo) still going strong. Previous: 1986 240 GL rusted out in '06, 1985 Saab 900T rusted out in '95, 1975 Saab 99 rusted out in '95, 1973 Saab 99 rusted out in '94
- Clemens
- Posts: 1956
- Joined: 03 Sep 2015, 12:34
- Year and Model: 96 855 R + 94 855 T5
- Location: Austria
- Has thanked: 500 times
- Been thanked: 228 times
He is a true wizard with the soldering iron ...
1996 855 R,
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
black on black, M56 swapped, Quaife, TME 2.5 exhaust, 17 inch Volants
2010 V70 D5,
Saville Gray on tan leather, 18 inch Odysseus
- foggydogg
- Posts: 2948
- Joined: 17 Oct 2009, 00:28
- Year and Model: '98 V70 R, 97 850 T5
- Location: District Of Columbia, not one of the Several States
- Has thanked: 83 times
- Been thanked: 405 times
How did you convince him to work on your already-opened module ? He seems quite blunt on his website about not dealing with previously repaired units.jreed wrote: 03 Mar 2022, 05:42 I recently went thru this experience again too, and had MattyMoo repair my once-upon-a-time repaired ABS module. He did a great job, the ABS system is working fine again -- problem solved.
69 1800s, @500k Death by Rust
94 850 Turbo, T-boned, ambulance for me, crusher for it
97 855 T5, 855 R projects
98 V70R x2, Silver Junkyard rescue, Coral Red
98 V70GLT x2, parts cars
00 V70xc x2, both now dead
62 122s, gone to live in Richmond
56 445 Duett basket project
1950 Studebaker 2R10 flatbed, T9 crashbox
94 850 Turbo, T-boned, ambulance for me, crusher for it
97 855 T5, 855 R projects
98 V70R x2, Silver Junkyard rescue, Coral Red
98 V70GLT x2, parts cars
00 V70xc x2, both now dead
62 122s, gone to live in Richmond
56 445 Duett basket project
1950 Studebaker 2R10 flatbed, T9 crashbox
-
Matty Moo
- Posts: 1810
- Joined: 12 Oct 2008, 21:38
- Year and Model: 850, 1996
- Location: Ann Arbor, MI
- Has thanked: 1 time
- Been thanked: 30 times
I don't mind repairing them if they're sent in to be repaired, I just don't want them back as cores if an exchange module is sent out. It isn't necessarily anything cut open, all of the ramac and programma cores I get in had previously been cut open but it's clean and you can't tell.
There aren't a million used cores out there like there used to be.
There aren't a million used cores out there like there used to be.

http://www.midwest-abs.com
Simplycleanpowerwash.com
1996 850 Platinum Wagon. ARD Green Tune, OBX.-Gone
1998 s70 ARD tune, EST exhaust, SE/R interior.
1999 s70 Plain Jane.
2000 s70 GLT
2014 Ram
2012 Jeep Wrangler Unlimited
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1845 Views
-
Last post by RickHaleParker
-
- 4 Replies
- 3360 Views
-
Last post by kingo
-
- 0 Replies
- 1457 Views
-
Last post by tsteenka
-
- 27 Replies
- 14424 Views
-
Last post by Orchid70
-
- 19 Replies
- 3766 Views
-
Last post by sak54757






