Login Register

Vida CEM swapping

Post Reply
User avatar
RickHaleParker  
Posts: 7197
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 978 times

Post by RickHaleParker »

charlie13 wrote: 06 Apr 2022, 14:34 everything works
What are you using to flash the CEM ?
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
Top
User avatar
charlie13
Posts: 46
Joined: 23 Mar 2022, 10:58
Year and Model: 2009 XC70
Location: Krakow
Has thanked: 8 times
Been thanked: 18 times

Post by charlie13 »

RickHaleParker wrote: 06 Apr 2022, 20:30
charlie13 wrote: 06 Apr 2022, 14:34 everything works
What are you using to flash the CEM ?
Hello. Used I / 0 terminal
Top
Evautos
Posts: 5
Joined: 30 Mar 2022, 14:30
Year and Model: 2005 XC70
Location: Devon
Has thanked: 2 times

Post by Evautos »

I used ioterminal too and confirm the replacement cloned fine.
Top
User avatar
gnalan
Posts: 968
Joined: 21 Jul 2020, 13:39
Year and Model: 2001 S60
Location: Ohio
Has thanked: 557 times
Been thanked: 135 times

Post by gnalan »

Cloning is possible now? Is that only for certain CEMs or every ECU?
2001 S60, B5244S, AW55-50SN, FWD (Sold)
Cancer/Illness/Caregiver Support Thread
Top
urosm
Posts: 29
Joined: 24 May 2012, 06:01
Year and Model: 2015 Volvo XC70 D5
Location: Montenegro
Has thanked: 10 times

Post by urosm »

IO Terminal works fine. R/W without any problem, but, first you need to read CEM PIN.
IO supports CEM P2 with M32 and P3 with R32 proccessor.
Volvo 744 TDIC SOLD, 1989. ; 1997. - 2000.
Volvo 855 GLT + LPG Estate SOLD, 1996. ; 1998. - 2020.
Volvo V70 D5 SOLD, 2004. ; 2013. - 2021.
Volvo XC70 D5 SOLD, 2007. ; 2017. - 2021.
Nissan Pathfinder DRIVING, 2007. ; 2019. -
Volvo XC70 D5 DRIVING, 2015. ; 2021. -
Volvo XC90 D5 DRIVING, 2008. ; 2022. -
Top
User avatar
RickHaleParker  
Posts: 7197
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 978 times

Post by RickHaleParker »

urosm wrote: 08 Apr 2022, 01:07 IO supports CEM P2 with M32 and P3 with R32 proccessor.
IO cannot get the PIN for the P2 CEM with the MC68376 ? We struck out. Vdash strikes out IO strikes out.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
Top
User avatar
RickHaleParker  
Posts: 7197
Joined: 25 May 2015, 14:30
Year and Model: See Signature below.
Location: Kansas
Has thanked: 8 times
Been thanked: 978 times

Post by RickHaleParker »

urosm wrote: 08 Apr 2022, 01:07 IO supports CEM P2 with M32 and P3 with R32 proccessor.
IO cannot get the PIN for the P2 CEM with the MC68386 ? We struck out. Vdash strikes out IO strikes out.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
Top
User avatar
charlie13
Posts: 46
Joined: 23 Mar 2022, 10:58
Year and Model: 2009 XC70
Location: Krakow
Has thanked: 8 times
Been thanked: 18 times

Post by charlie13 »

Hello. CEM's that support I / 0
Attachments
CEMs I0.jpeg
Top
urosm
Posts: 29
Joined: 24 May 2012, 06:01
Year and Model: 2015 Volvo XC70 D5
Location: Montenegro
Has thanked: 10 times

Post by urosm »

RickHaleParker wrote: 08 Apr 2022, 05:12
urosm wrote: 08 Apr 2022, 01:07 IO supports CEM P2 with M32 and P3 with R32 proccessor.
IO cannot get the PIN for the P2 CEM with the MC68376 ? We struck out. Vdash strikes out IO strikes out.
IO cannot get the PIN from MC68376, unfortunately.
But for P2 facelift working like charm!
Volvo 744 TDIC SOLD, 1989. ; 1997. - 2000.
Volvo 855 GLT + LPG Estate SOLD, 1996. ; 1998. - 2020.
Volvo V70 D5 SOLD, 2004. ; 2013. - 2021.
Volvo XC70 D5 SOLD, 2007. ; 2017. - 2021.
Nissan Pathfinder DRIVING, 2007. ; 2019. -
Volvo XC70 D5 DRIVING, 2015. ; 2021. -
Volvo XC90 D5 DRIVING, 2008. ; 2022. -
Top
vtl
Posts: 4928
Joined: 16 Aug 2012, 13:35
Year and Model: 2005 XC70
Location: Boston
Has thanked: 129 times
Been thanked: 686 times

Post by vtl »

urosm wrote: 09 Apr 2022, 01:23 IO cannot get the PIN from MC68376, unfortunately.
But for P2 facelift working like charm!
What do you mean exactly? Does I/O Terminal crack pin code now? Or it knows where to look for the pin in the flash dump?
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “XC90 1st gen 2003-2014”