Universal remote control

Jonny88 · Post by **Jonny88** » 03 May 2022, 07:53

Hi. I want to install a universal remote control unit on my 2005 v70.

Is this possible?

Jonny88 · Post by **Jonny88** » 03 May 2022, 11:31

Cant find a wire that open/lock doors

On other cars i have used the wire from open lock button inside the car.

The open lock button sits together with window and mirror adjustment on the door

I bought this one from ebay:

https://www.ebay.com/itm/353724892429?m ... &media=SMS

Post by **BlackBart** » 03 May 2022, 14:49

Jonny88 wrote: 03 May 2022, 07:53 Hi. I want to install a universal remote control...

Does it turn on the TV and the VCR too?

Post by **vtl** » 03 May 2022, 15:51

Why you need this?

Jonny88 · Post by **Jonny88** » 04 May 2022, 02:33

To open and close the doors

My one and only key went in the washing machine

Have 3 keys now with taping original chip to sensor and bought blank keys on ebay

But i have stick the key in the door to lock the car

Way to expensive to buy original key with remote

Post by **vtl** » 04 May 2022, 07:46

What exactly broke? ID48 (immobilizer, glass pill) or the remote fob got reset in hot, soapy water? I think the latter one can be programmed again.

Jonny88 · Post by **Jonny88** » 04 May 2022, 09:39

The immobilizer is now glued to sensor around key hole. So every key works without immobilizer.

The remote part is not working. I also think programming it could work.

But this cost way more plus i want two remotes

Jonny88 · Post by **Jonny88** » 09 May 2022, 05:46

Can i install a universal remote unit to open/close doors on my 2005 v70 and how?

Dont need anymore question like:
"Does it turn on the TV and the VCR too?"
Or "Why you need this?"

Post by **vtl** » 09 May 2022, 06:31

You need to integrate that thing with your car's CAN bus and send lock/unlock messages.

Post by **abscate** » 11 May 2022, 04:03

I would tap into pin 1 or 5 on the door module, see attached. This is for a petrol car , we don’t get diesels in North America

One of those pins Will be a 5 volt logic, the other the trigger to toggle the locks

A universally remote would then connect that signal to the DDM