I will. I just went out and took some pictures. I’m going to do my write up offline so I can copy and paste it to the ad. I’ll probably post it tomorrow night. I’ll wait a week or two before I put it on CL.
What did you do to your P2 Volvo today?
- DonnVa
- Posts: 239
- Joined: 10 July 2020
- Year and Model: 2005 XC70
- Location: Mechanicsville, VA
- Has thanked: 21 times
- Been thanked: 60 times
Re: What did you do to your P2 Volvo today?
2005 XC70 Cross Country 2.5T 185k miles
1962 122s 4dr 100k+ TMU
-Previous-
2007 S60 2.5T
1996 850 GLT
1974 164E
-Notable-
1983 911sc
1994 325i
2007 335 coupe
30 + other cars and trucks
1962 122s 4dr 100k+ TMU
-Previous-
2007 S60 2.5T
1996 850 GLT
1974 164E
-Notable-
1983 911sc
1994 325i
2007 335 coupe
30 + other cars and trucks
- gnalan
- Posts: 968
- Joined: 21 July 2020
- Year and Model: 2001 S60
- Location: Ohio
- Has thanked: 557 times
- Been thanked: 135 times
I'm hoping someone from here will either buy my S60 or know someone that will. I haven't posted it anywhere else, and I don't really want to use Craigslist.
Good luck with your sale Don.
Nick
Good luck with your sale Don.
Nick
2001 S60, B5244S, AW55-50SN, FWD (Sold)
Cancer/Illness/Caregiver Support Thread
Cancer/Illness/Caregiver Support Thread
- jonesg
- Posts: 3505
- Joined: 16 January 2008
- Year and Model: 2004 V70
- Location: Northern maine.
- Has thanked: 69 times
- Been thanked: 481 times
the exhaust battle continues.
flange repair seems ok but i can hear noise from the flex pipe area, may have to get a new downpipe with cat.
So, I just found the leak at the welds holding the mounting brackets to the cat converter.
I might try cleaning and splattering red RTV but the welds are cracking.
I can't find a new downpipe catalytic converter downpipe on FCP or IPD.
Are they NLA ?
2004 v70 turbo AWD.
flange repair seems ok but i can hear noise from the flex pipe area, may have to get a new downpipe with cat.
So, I just found the leak at the welds holding the mounting brackets to the cat converter.
I might try cleaning and splattering red RTV but the welds are cracking.
I can't find a new downpipe catalytic converter downpipe on FCP or IPD.
Are they NLA ?
2004 v70 turbo AWD.
- br0dy519
- Posts: 746
- Joined: 17 December 2019
- Year and Model: 2004 XC70
- Location: Windsor, ON
- Has thanked: 126 times
- Been thanked: 116 times
I remember reading about a performance exhaust supplier that provided quality aftermarket replacements for our cars… driving me nuts trying to remember !
04s60 2.4
04xc70 2.5t
04xc70 2.5t
prwood wrote:I wish I had a permanent car repair area that was covered, had a level surface, lighting and fans, a workbench, and tool cabinets. You know,like a garage. Much of my time during the job is spent hauling things up and down the stairs to the basement or in and out of the storage shed, or running back downstairs when I realize I need something else,or taking a break from standing out in the sun,or using flashlights or work lamps when it gets dark.
- jonesg
- Posts: 3505
- Joined: 16 January 2008
- Year and Model: 2004 V70
- Location: Northern maine.
- Has thanked: 69 times
- Been thanked: 481 times
switching from pressure to vacuum, hopefully to draw the muffler cement into the hole a bit.
Otherwise I'll try pulling the system out and tig weld it on the bench.
If that fails i'm done fixing. ....time to start buying.
i'll know in 24 hrs,
Otherwise I'll try pulling the system out and tig weld it on the bench.
If that fails i'm done fixing. ....time to start buying.
i'll know in 24 hrs,
- br0dy519
- Posts: 746
- Joined: 17 December 2019
- Year and Model: 2004 XC70
- Location: Windsor, ON
- Has thanked: 126 times
- Been thanked: 116 times
Finally found it! I remember seeing a lot of posts a while ago about OBX exhaust being a good replacement. Unfortunately I have no idea how you would procure one of these nor if it’s compatible with yours. Link:
http://www.obxracingsports.com/products.php?pk=3145
Also reading good things about 8eightfab, but looks pricy.
I see lots of cat’s on rockauto. I imagine you just don’t trust the quality there ?
http://www.obxracingsports.com/products.php?pk=3145
Also reading good things about 8eightfab, but looks pricy.
I see lots of cat’s on rockauto. I imagine you just don’t trust the quality there ?
04s60 2.4
04xc70 2.5t
04xc70 2.5t
prwood wrote:I wish I had a permanent car repair area that was covered, had a level surface, lighting and fans, a workbench, and tool cabinets. You know,like a garage. Much of my time during the job is spent hauling things up and down the stairs to the basement or in and out of the storage shed, or running back downstairs when I realize I need something else,or taking a break from standing out in the sun,or using flashlights or work lamps when it gets dark.
-
vtl
- Posts: 4727
- Joined: 16 August 2012
- Year and Model: 2005 XC70
- Location: Boston
- Has thanked: 114 times
- Been thanked: 606 times
$849.95 https://www.snabb.us/3-High-Flow-Cat-Do ... p_320.html I got it for $495 3 years ago, wow.
If you need a catback, too - don't buy from Snabb web site. It's a Jetex made in Poland, poorly made. For the same money you can get Volvo catback, which is of the finest quality.
Snabb downpipe is very good.
-
- Similar Topics
- Replies
- Views
- Last post






