Based on the attached pictures, how bad are my sway bar bushings? This is on a 2000 V70 with 228k miles. I don't feel or hear any noise from them. Just just look cracked. I don't want poly bushings since lubricating them seems like a pain, so I'm considering replacing the entire bar.
Is it recommended to replace a rusty sway bar? The black coating has failed in a few spots.
Can a 2000 V70 accept any variation of sway bar? The sway bar I need (9173983 "marked 2") is not available, but 9173982 "marked 1" is available. Are they only different because their diameter?
How bad are my sway bar bushings?
-
FireFox31
- Posts: 1635
- Joined: 14 August 2006
- Year and Model: 2000 V70 NA auto
- Location: New Hampshire
- Has thanked: 158 times
- Been thanked: 300 times
How bad are my sway bar bushings?
- Attachments
-
- PXL_20220713_013807673.jpg (315.49 KiB) Viewed 418 times
-
- PXL_20220713_013818943.jpg (294.59 KiB) Viewed 418 times
FireFox31
Blue 2000 V70 NA manual, "the V70" - died, reborn, totaled, donated, stripped
Green 2000 V70 NA automatic, "the G70" - awaiting 2nd rehab
Black 2000 V70 NA automatic, "Geronimo" - rescued, rehabilitating
Blue 1998 V70 T5 manual, "the T5M" - awaiting rehab
Blue 2000 V70 NA manual, "the V70" - died, reborn, totaled, donated, stripped
Green 2000 V70 NA automatic, "the G70" - awaiting 2nd rehab
Black 2000 V70 NA automatic, "Geronimo" - rescued, rehabilitating
Blue 1998 V70 T5 manual, "the T5M" - awaiting rehab
-
scot850
- Posts: 14893
- Joined: 5 April 2010
- Year and Model: 2000 V70 R
- Location: Calgary, Alberta, Canada
- Has thanked: 1850 times
- Been thanked: 1710 times
Yes is the answer. The only difference is the diameter. I once posted the part numbers and codes a long time back. If I recall the V70XC was the thickest at around 21.5mm if I remember correctly.
If you are not hearing any groaning from the sway-bar or clunking they I would leave it alone. Sure it is getting ugly but as you know the bushes are vulcanised onto the sway-bar, once they let go you will know it!
You could preserve the bar itself for now with some POR-15 or similar and a wire brush!
Neil.
If you are not hearing any groaning from the sway-bar or clunking they I would leave it alone. Sure it is getting ugly but as you know the bushes are vulcanised onto the sway-bar, once they let go you will know it!
You could preserve the bar itself for now with some POR-15 or similar and a wire brush!
Neil.
2006 V70 2.5T AWD Polestar tune
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
-
- Similar Topics
- Replies
- Views
- Last post