Vida CEM swapping

oscilloscope · Post by **oscilloscope** » 18 Oct 2022, 15:47

Obd port turned up today. So I figured I'll give some twisted wires ago and see if it makes any difference I'll I await the other transceivers to arrive from the states.

oscilloscope · Post by **oscilloscope** » 18 Oct 2022, 16:07

This memory fault appears when I compile ? But doesn't appear to impact the functioning of the tool. And there is also encryption file missing ? Is that something I Need ?

oscilloscope · Post by **oscilloscope** » 18 Oct 2022, 16:57

so following on with the cracker. i did notice it only finds the CAN LS not the CAN Hs , so i am assuming i am having a connection error with the CAN H signal. i'll check over my wiring again. then again it may well be somthing to do with the CAN shark all in one modules i am using. so it is hardly surprising i'm having issues but it's a wild guess. at this stage.

it didn't decode it again , next time i'll take a pic as the error doesn't really make much sense.

liyezhu · Post by **liyezhu** » 18 Oct 2022, 20:54

hello everyone
I have a way to quickly solve P1, P2, P3, and CEM PINs. If you need help, please contact [removed]

5ft24 · Post by **5ft24** » 18 Oct 2022, 21:15

liyezhu wrote: 18 Oct 2022, 20:54 hello everyone
I have a way to quickly solve P1, P2, P3, and CEM PINs. If you need help, please contact [removed]

Ah yes. A scammer

oscilloscope · Post by **oscilloscope** » 18 Oct 2022, 23:47

5ft24 wrote: 18 Oct 2022, 21:15
liyezhu wrote: 18 Oct 2022, 20:54 hello everyone
I have a way to quickly solve P1, P2, P3, and CEM PINs. If you need help, please contact [removed]
Ah yes. A scammer

Spotted a mile off.

Post by **RickHaleParker** » 19 Oct 2022, 02:25

5ft24 wrote: 18 Oct 2022, 21:15 Ah yes. A scammer

If he is a scammer, he just blind cast fishing. He should of been able to see we make poor Marks.

If he had taken the time to read this and think. He would of realized this is a DIY form. People that do DIY are not looking for quick solutions. They are looking for a DIY ( Do It Yourself ) solution. The fact that this thread is 243 pages long, so far, is proof of that.

It is a Mark's own greed or laziness that enables a scam to work.

liyezhu · Post by **liyezhu** » 19 Oct 2022, 06:51

Don't judge others blindly. Give your VIN and let you know the result in 5 minutes. Unable to reply in time due to time differen
@ 5ft24

liyezhu · Post by **liyezhu** » 19 Oct 2022, 07:02

I solved the PIN code for the friend's two cars. You can ask him if I am a liar

5ft24 · Post by **5ft24** » 19 Oct 2022, 07:50

liyezhu wrote: 19 Oct 2022, 07:02 I solved the PIN code for the friend's two cars. You can ask him if I am a liar

No one cares. You are scamming the group. This isn't a forum to advertise in. It is a forum for people to create their own methods. Go peddle your crap elsewhere