You need a 'key' on the security packaging to program a fob. If you don't have the key, then the dealer cannot program the fob if I recall. When our transponder stopped in one of our fobs, I fitted a new one but still have to buy a fob to get the key to program them.
Locally we have lock smiths who claim to program Volvo keys for a lot less than the dealer. Never tried them out but maybe you have something similar over that side of the country.
Neil.
I need a new key/fob for my 2007 XC70...
-
scot850
- Posts: 14864
- Joined: 5 April 2010
- Year and Model: 2000 V70 R
- Location: Calgary, Alberta, Canada
- Has thanked: 1834 times
- Been thanked: 1709 times
Re: I need a new key/fob for my 2007 XC70...
2006 V70 2.5T AWD Polestar tune
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
-
br0dy519
- Posts: 743
- Joined: 17 December 2019
- Year and Model: 2004 XC70
- Location: Windsor, ON
- Has thanked: 123 times
- Been thanked: 115 times
If yagger can program blank transponder chips, you could get one off aliexpress along with a new housing for probably under $20. I’ve replaced 3 fobs because of switchblades that went defective, transferring the chip over carefully like in the below link. but I noticed last time sellers now carry the little glasss chip.
I use this guide https://andrewpeng.net/cars/2006-volvo- ... key-repair
Please update us. I have never gone through such a repair and it would be nice to have this resource in case of emergency!
I use this guide https://andrewpeng.net/cars/2006-volvo- ... key-repair
Please update us. I have never gone through such a repair and it would be nice to have this resource in case of emergency!
04s60 2.4
04xc70 2.5t
04xc70 2.5t
prwood wrote:I wish I had a permanent car repair area that was covered, had a level surface, lighting and fans, a workbench, and tool cabinets. You know,like a garage. Much of my time during the job is spent hauling things up and down the stairs to the basement or in and out of the storage shed, or running back downstairs when I realize I need something else,or taking a break from standing out in the sun,or using flashlights or work lamps when it gets dark.
-
ADent
- Posts: 42
- Joined: 8 July 2009
- Year and Model: 2001 V70 T5M
- Location: Denver, CO
- Been thanked: 5 times
My understanding is you need the serial # for a key to be programmed. Typically you need a new key to get that number for the transponder on a key (unless someone bought a key and kept the box/bag it came in?).
And yes it typically needs to be programmed at the dealer (though a few can do this aftermarket).
You can clone a key that's already working.
Not sure what the deal on the fobs is.
And yes it typically needs to be programmed at the dealer (though a few can do this aftermarket).
You can clone a key that's already working.
Not sure what the deal on the fobs is.
2001 V70 T5M
1988 740 GLE 5.0
1988 740 GLE 5.0
-
- Similar Topics
- Replies
- Views
- Last post