VIDA 2014D_Repack install on Windows 10, any version.

timmyong · Post by **timmyong** » 19 Oct 2022, 20:45

Hello I followed the steps according to the guide but I'm facing errors from the run files 3/Patch 2099 both is giving me tskill.exe is not recognized on CMD followed by Windows cannot find %VIDA_HOME%patch\filldb.cmd

Currently using a brand new Lenovo x1 carbon gen 9 on Windows 10 Pro

Post by **RickHaleParker** » 19 Oct 2022, 22:20

timmyong wrote: 19 Oct 2022, 20:45 Hello I followed the steps according to the guide but I'm facing errors from the run files 3/Patch 2099 both is giving me tskill.exe is not recognized on CMD followed by Windows cannot find %VIDA_HOME%patch\filldb.cmd

tskill.exe is located in Windows\System32\ . Copy it to Windows\SystWOW64\
Try right clicking on the patch and run it as administrator.
If that does not work. Try disableing Windows Defender. Windows Defender gets a lot of things dead wrong.

timmyong · Post by **timmyong** » 19 Oct 2022, 22:51

RickHaleParker wrote: 19 Oct 2022, 22:20
timmyong wrote: 19 Oct 2022, 20:45 Hello I followed the steps according to the guide but I'm facing errors from the run files 3/Patch 2099 both is giving me tskill.exe is not recognized on CMD followed by Windows cannot find %VIDA_HOME%patch\filldb.cmd
tskill.exe is located in Windows\System32\ . Copy it to Windows\SystWOW64\
Try right clicking on the patch and run it as administrator.
If that does not work. Try disableing Windows Defender. Windows Defender gets a lot of things dead wrong.

i got a new error 15105: The resource loader cache doesn't have loaded MUI entry.

Dgrabke · Post by **Dgrabke** » 02 Nov 2022, 08:19

Got it to install, but running into trouble logging in. at the login screen, using admin......opens WSL Login window, then states "Navigation to page has been cancelled". Not sure what I'm doing wrong.

Post by **RickHaleParker** » 02 Nov 2022, 20:49

timmyong wrote: 19 Oct 2022, 22:51 i got a new error 15105: The resource loader cache doesn't have loaded MUI entry.

You got so may problems with that machine I would wipe the hard drive and install a fresh copy of Windows.

Post by **RickHaleParker** » 02 Nov 2022, 20:57

Dgrabke wrote: 02 Nov 2022, 08:19 Got it to install, but running into trouble logging in. at the login screen, using admin......opens WSL Login window, then states "Navigation to page has been cancelled". Not sure what I'm doing wrong.

Windows Subsystem for Linux (WSL) ...

?

Dgrabke · Post by **Dgrabke** » 03 Nov 2022, 09:57

Not sure? I put in admin on the login screen and a separate window comes up with that WSL in the corner. Any ideas?

RSchally · Post by **RSchally** » 04 Nov 2022, 17:14

Hi there,

how can I get the German language package (got db files from 2014C) run with that?

Post by **RickHaleParker** » 04 Nov 2022, 23:50

RSchally wrote: 04 Nov 2022, 17:14 how can I get the German language package (got db files from 2014C) run with that?

The 2014C German language pack should work with 2014D. I think you need to include and select the language pack at the time you do the install. Add the German language pack folder to the DB folder in the 2014D_Repack.iso . It should show up in the language selection list when you are installing VIDA.

You might pack the German language pack folder into a zip file and attach it to your next message. Some other people may have a use for it.

RSchally · Post by **RSchally** » 05 Nov 2022, 00:03

Thanx for getting and let me thank you again for that great job. Did try a thousand times to install but no success unless I found your repack...

I did install German (copied files to specific folder), made new .iso and it German language shows up when installing VIDA but at the login (in VIDA, where you enter admin or the numbers) was greyed out, couldn't enter anything. And a bit below it names the version installed but no language.

Can I mount your .iso, copy to a folder and install from the folder or does it have to be installed from your mounted .iso?

Would like to upload but it is above 200MB