MVS Buddy Project

Post by **manovlov** » 04 Nov 2022, 02:40

The intake manifold gasket is available by Volvo but with 2 weeks. Send directly from Sweden... Even though mechanic teaches me to be patient, i don't want to wait so long. Ordered on a french website, will get it Wednesday next week...

I've found the hose from the PCV at the junkyard. Will get it next friday. 29 $ from a 850 with 111 000 miles.

Post by **manovlov** » 05 Nov 2022, 13:52

Today, it's injectors party. I've cleaned the outside. It's not what will make them getting better. But it's done.I will test them later.

The reference of mine is :

: Injector reference.jpg (59.42 KiB) Viewed 358 times

Bosch gives me 15,9 ohms (Haynes), my ohmmeter gives me the following values, all the same :

: Capture d’écran 2022-11-05 à 20.15.53.jpg (29.02 KiB) Viewed 358 times

Before

: IMG_3888.jpeg (30.63 KiB) Viewed 358 times

After

: IMG_3895.jpeg (78.85 KiB) Viewed 358 times

Get the inside filter out

: IMG_3890.jpeg (63.06 KiB) Viewed 358 times

Seals episode

Injectors seals kit (5a - 5b)

the protective cap is crimped and i don't know how to get it away. Have to simply pull the cap out ? When it will be out, the kit gives new yellow flat seal

: IMG_3904.jpg (32.79 KiB) Viewed 358 times

Manov

Post by **manovlov** » 06 Nov 2022, 13:05

Does this part tells something to someone ?

: Capture d’écran 2022-11-06 à 21.19.50.jpg (25.4 KiB) Viewed 337 times

Post by **Goupil** » 06 Nov 2022, 14:31

The only point of this part is to keep people from getting to the ECU (warranty reason, thieves, insurance...)

Post by **scot850** » 06 Nov 2022, 15:58

Wow, never seen that bar on the ECU/TCU cover. Maybe it is a EU thing?

Neil.

Post by **manovlov** » 06 Nov 2022, 21:45

manovlov wrote: 06 Nov 2022, 13:05 Does this part tells something to someone ?
Capture d’écran 2022-11-06 à 21.19.50.jpg

Actually, not sure if it's an OEM part...

Post by **Goupil** » 07 Nov 2022, 11:29

scot850 wrote: 06 Nov 2022, 15:58 Wow, never seen that bar on the ECU/TCU cover. Maybe it is a EU thing?

Neil.

Could be, I've seen it on a few cars here. Mine had already been messed with so it didnt have it.

I've parted out a 940 where you also had to destroy the bracket security rivets to unplug it from the car.

Post by **scot850** » 07 Nov 2022, 11:53

Maybe it was an emissions control to stop the ECU's being removed and modified? Strange though.

Neil.

Post by **manovlov** » 07 Nov 2022, 12:44

The gaskets that go inside the fuel rail are available from Volvo for $6 each. Order now!

Post by **manovlov** » 07 Nov 2022, 12:45

Considering the shape of the thing, I think it's more of a DIY, the fold of the hoop doesn't really match the fold of the lid.