Vida CEM swapping

Post by **vtl** » 11 Jun 2023, 09:11

Better get a standalone analyzer.

oscilloscope · Post by **oscilloscope** » 11 Jun 2023, 11:41

vtl wrote: ↑11 Jun 2023, 09:11 Better get a standalone analyzer.

I have seen many many cheap ones on ebay. But I figured that they might not be any good due too them maybe Causing unnecessary noise or reading packets incorrectly or not reading at all. , or not having standardised connection id's on the wiring harness.

oscilloscope · Post by **oscilloscope** » 13 Jun 2023, 14:56

vtl wrote: ↑11 Jun 2023, 09:11 Better get a standalone analyzer.

Any suggestions ? , I was going to buy the addon for my scope but its typically back order.

Post by **vtl** » 13 Jun 2023, 16:30

oscilloscope wrote: ↑13 Jun 2023, 14:56 Any suggestions ? , I was going to buy the addon for my scope but its typically back order.

CEM cracking possibility was investigated using a $9.99 Saleae logic analyzer Chinese knock-off. It is $14.75 on ebay now. Later I decided to buy a genuine one, but they spoiled the software, so I went with DSLogic Plus, which is just awesome, both hw and sw. If $150 is a bearable sum for you, get the latter one.

oscilloscope · Post by **oscilloscope** » 16 Jun 2023, 13:55

vtl wrote: ↑13 Jun 2023, 16:30
oscilloscope wrote: ↑13 Jun 2023, 14:56 Any suggestions ? , I was going to buy the addon for my scope but its typically back order.
CEM cracking possibility was investigated using a $9.99 Saleae logic analyzer Chinese knock-off. It is $14.75 on ebay now. Later I decided to buy a genuine one, but they spoiled the software, so I went with DSLogic Plus, which is just awesome, both hw and sw. If $150 is a bearable sum for you, get the latter one.

Yes that is much cheaper then the add on for my scope. That's 5 times the price of that.

oscilloscope · Post by **oscilloscope** » 16 Jun 2023, 14:12

vtl wrote: ↑13 Jun 2023, 16:30
oscilloscope wrote: ↑13 Jun 2023, 14:56 Any suggestions ? , I was going to buy the addon for my scope but its typically back order.
CEM cracking possibility was investigated using a $9.99 Saleae logic analyzer Chinese knock-off. It is $14.75 on ebay now. Later I decided to buy a genuine one, but they spoiled the software, so I went with DSLogic Plus, which is just awesome, both hw and sw. If $150 is a bearable sum for you, get the latter one.

i have managed too find a supplier over in the UK , it should be with me pretty soon i'll guessing.

Post by **vtl** » 16 Jun 2023, 14:16

oscilloscope wrote: ↑16 Jun 2023, 14:12 i have managed too find a supplier over in the UK , it should be with me pretty soon i'll guessing.

DSLogic?

oscilloscope · Post by **oscilloscope** » 16 Jun 2023, 14:20

vtl wrote: ↑16 Jun 2023, 14:16
oscilloscope wrote: ↑16 Jun 2023, 14:12 i have managed too find a supplier over in the UK , it should be with me pretty soon i'll guessing.
DSLogic?

yes DSLogic Plus , 400mhz sampling rate & 256 onboard memory.

oscilloscope · Post by **oscilloscope** » 16 Jun 2023, 14:29

vtl wrote: ↑16 Jun 2023, 14:16
oscilloscope wrote: ↑16 Jun 2023, 14:12 i have managed too find a supplier over in the UK , it should be with me pretty soon i'll guessing.
DSLogic?

did you use any of the multi-com.pl break out boards & connectors or just the general wiring harness which i am assuming comes with the device?

Post by **vtl** » 16 Jun 2023, 14:32

oscilloscope wrote: ↑16 Jun 2023, 14:29 did you use any of the multi-com.pl break out boards & connectors or just the general wiring harness which i am assuming comes with the device?

The ones with the board.

Vida CEM swapping

Re: Vida CEM swapping