Login Register

XC70 - Front headlights swap

Post Reply
Stonedraider88
Posts: 19
Joined: 17 Jun 2018, 10:51
Year and Model: 2005 XC70
Location: Russia
Been thanked: 1 time

Post by Stonedraider88 »

Hi everybody!

My front lens on the right is showing age and has gone all blurry. I can try to polish it and hope for the best, however, I was wondering if the v70 (2001) lenses would fit (they are glass)

xHeart
Posts: 3321
Joined: 03 Dec 2011, 08:05
Year and Model: 2.0/3.2
Location: Great Lakes - USA
Has thanked: 116 times
Been thanked: 119 times

Post by xHeart »

Stonedraider88 wrote: 15 Aug 2023, 04:10 Hi everybody!

My front lens on the right is showing age and has gone all blurry. I can try to polish it and hope for the best, however, I was wondering if the v70 (2001) lenses would fit (they are glass)
The 2001 may not fit. You can search the part number and map it for fitment; try this https://www.ipdusa.com/Catalog/Index?se ... 0headlight
--
Golden-German Shepherd | 2021 XC90 T6 INSCRIPTION (Nexa) | 2020 V60CC (Frska) | 2013A XC90 (Lktra)
Past: Golden Retriever | 2001 V70XC | 1997 Volvo 854 | 1989 Volvo 740 GL | 1979 Volvo 240

User avatar
Blacklab467
Posts: 1139
Joined: 09 Aug 2016, 16:25
Year and Model: 2007 xc 70
Location: Calgary, AB
Has thanked: 117 times
Been thanked: 271 times

Post by Blacklab467 »

The glass headlights pre '05 will not fit. I've had good results making plastic headlights look new by wet sanding with 800-1000-1500-2000 grit sandpaper in that order followed by power polishing with a cut and polish like Meguiars or 3M.
2003 XC 70 (sold)
2007 XC 70, 1970 Dodge Charger R/T.

User avatar
P80GLT
Posts: 397
Joined: 18 Jan 2023, 09:41
Year and Model: 850, 1997, GLT
Location: Scotland
Has thanked: 154 times
Been thanked: 176 times

Post by P80GLT »

Wiring plug is different on pre-facelift
1997 850 GLT website
2010 XC90 SE...SOLD
2005 V70 2.5T SE

Stonedraider88
Posts: 19
Joined: 17 Jun 2018, 10:51
Year and Model: 2005 XC70
Location: Russia
Been thanked: 1 time

Post by Stonedraider88 »

Blacklab467 wrote: 15 Aug 2023, 07:45 The glass headlights pre '05 will not fit. I've had good results making plastic headlights look new by wet sanding with 800-1000-1500-2000 grit sandpaper in that order followed by power polishing with a cut and polish like Meguiars or 3M.
Noted, thanks! I will try to polish them as you suggest, do I need to put any kind of film or clear coat over the lens after? I am wondering how long will the polish last.

Stonedraider88
Posts: 19
Joined: 17 Jun 2018, 10:51
Year and Model: 2005 XC70
Location: Russia
Been thanked: 1 time

Post by Stonedraider88 »

P80GLT wrote: 15 Aug 2023, 09:28 Wiring plug is different on pre-facelift
Got you, thanks!

Stonedraider88
Posts: 19
Joined: 17 Jun 2018, 10:51
Year and Model: 2005 XC70
Location: Russia
Been thanked: 1 time

Post by Stonedraider88 »

xHeart wrote: 15 Aug 2023, 07:36
Stonedraider88 wrote: 15 Aug 2023, 04:10 Hi everybody!

My front lens on the right is showing age and has gone all blurry. I can try to polish it and hope for the best, however, I was wondering if the v70 (2001) lenses would fit (they are glass)
The 2001 may not fit. You can search the part number and map it for fitment; try this https://www.ipdusa.com/Catalog/Index?se ... 0headlight
Got you, thanks!

I also have a faulty body position sensor, so the headlights droop to the lowest position. So at the moment the motors in the headlight assembly are unplugged and are manually set up so they dont move. However this throws up the "headlight failure" message. I know where the sensor is located and it seems like an easy replacement, however I read up somewhere here that it needs programming, any pointers on that? Also I am struggling to find the actual part number, there are two types and I am not sure which one is for the XC70 P2.

Is this it? Part number - 31300198

vtl
Posts: 4934
Joined: 16 Aug 2012, 13:35
Year and Model: 2005 XC70
Location: Boston
Has thanked: 129 times
Been thanked: 686 times

Post by vtl »

Stonedraider88 wrote: 15 Aug 2023, 11:37 Noted, thanks! I will try to polish them as you suggest, do I need to put any kind of film or clear coat over the lens after? I am wondering how long will the polish last.
UV-resistant coat is pretty much must or it won't survive even a few weeks. Some kits come with such coat, like Sylvania headliht restoration kit.

Still, it's a temporary measure. I had to do it roughly once a year. Wrapped in polyurethane film a few years back, it's not perfect and still yellows, but at least it ages better than just polished lens.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post