Has anyone 3d printed headlight wiper delete caps?

myname · Post by **myname** » 13 Feb 2024, 15:02

no offense to Vida, but 90$usd is a little steep.

Im looking specifically for an 2002 V70. Im not exactly sure if its identical to the R's.

Post by **cn90** » 13 Feb 2024, 15:31

What is the Volvo PN?

myname · Post by **myname** » 15 Feb 2024, 13:59

Volvo never made them OEM as far as I know

Post by **cn90** » 15 Feb 2024, 14:41

Any photo of what you referred to?

Post by **erikv11** » 15 Feb 2024, 17:41

presumably this https://www.vivaperformance.com/headlig ... -and-v70r/

agree with OP this will not likely fit an 02 V70 anyway, but the link outlines the concept

myname · Post by **myname** » 16 Feb 2024, 16:21

exactly. Im not sure if its identical to the R's.
But you remove the wiper motors (they dont work) and you're left with a huge hole there.

Post by **matthew1** » 16 Feb 2024, 16:38

Paint-matched or black? Not that I can 3D model and print, I'm just curious.

Post by **erikv11** » 17 Feb 2024, 00:19

Sure look like the same size though!

myname · Post by **myname** » 17 Feb 2024, 08:33

matthew1 wrote: 16 Feb 2024, 16:38 Paint-matched or black? Not that I can 3D model and print, I'm just curious.

Id take black/raw. The car is silver, and from experience its hard to find a silver that doesnt match pretty well with anything in a can.

Post by **Blacklab467** » 17 Feb 2024, 13:02

I think you should fix your headlight wipers instead. They are generally pretty easy to fix and maintain and as someone who does a lot of winter driving in mountainous conditions, they are invaluable. It’s a shame that Volvo dropped them on the 06, 07 P2’s and subsequent models.