Faint, single "pop" sound when taking off
-
hu5ker555
- Posts: 182
- Joined: 30 November 2011
- Year and Model: 2008 S60, 2015 S60
- Location: Kansas
- Has thanked: 42 times
- Been thanked: 14 times
Faint, single "pop" sound when taking off
When pulling forward from a dead stop, there is a faint, single "pop" sound that I'm hearing/feeling. Doesn't happen every time, but it's definitely there. Wondering if it could be one of the various motor mounts. Thoughts/suggestions?
-
hu5ker555
- Posts: 182
- Joined: 30 November 2011
- Year and Model: 2008 S60, 2015 S60
- Location: Kansas
- Has thanked: 42 times
- Been thanked: 14 times
Interesting...it also does feel like there is just a little more slop in the front end, for instance when I'm turning into my driveway and going over the curb cut. Otherwise, it rides and feels great.
- MoVolvos
- Posts: 5270
- Joined: 15 January 2012
- Year and Model: S&V70XC,S60,C30,XC90
- Location: NC
- Has thanked: 310 times
- Been thanked: 524 times
.
A good possibility with some worse than others.
Axle Bolt with Rubber Insulator (Anti-Ping) Front
https://www.ipdusa.com/products/6251/Ax ... o-30670602
.
.
A good possibility with some worse than others.
Axle Bolt with Rubber Insulator (Anti-Ping) Front
https://www.ipdusa.com/products/6251/Ax ... o-30670602
.
.
Blessings,
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
- MoVolvos
- Posts: 5270
- Joined: 15 January 2012
- Year and Model: S&V70XC,S60,C30,XC90
- Location: NC
- Has thanked: 310 times
- Been thanked: 524 times
.
Or this? One of the more difficult to find noises. Installed these on our 03 S80 T6 with success.
Subframe O-Ring (Addresses sub-frame knocking noise)
https://www.ipdusa.com/products/8283/Su ... vo-8638585
.
Or this? One of the more difficult to find noises. Installed these on our 03 S80 T6 with success.
Subframe O-Ring (Addresses sub-frame knocking noise)
https://www.ipdusa.com/products/8283/Su ... vo-8638585
.
Blessings,
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
BKM
2008 C30 T5 2.0 M66
2007 S60 2.5T - New Project
2003 S80 T6 Transmission DIED
2000 S70 SE Base - New Project
1998 S70 T5 Prior
1989 240 Wagon Prior
- RickHaleParker
- Posts: 7129
- Joined: 25 May 2015
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 958 times
Open the hood, fix eyes on strut mount, bounce car up and down.
Is the rubber on the strut mount broken?
⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙⸙
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
-
dikidera
- Posts: 1304
- Joined: 15 August 2022
- Year and Model: S60 2005
- Location: Galaxy far far away
- Has thanked: 67 times
- Been thanked: 175 times
Sorry actually instead of just strut mounts I was going to say strut bearings. Mine are for sure bad(well the one, I've replaced the other one).
Couple of years ago = couple of years too many now. It's time probably. But also, there is one small rubber pad(also called spring seat) on which the strut spring lays(lies?), if it has disintegrated, which I am sure happens after years, the spring can come into direct metal to metal contact with the strut spring seat.
Couple of years ago = couple of years too many now. It's time probably. But also, there is one small rubber pad(also called spring seat) on which the strut spring lays(lies?), if it has disintegrated, which I am sure happens after years, the spring can come into direct metal to metal contact with the strut spring seat.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 1091 Views
-
Last post by Thenextman
-
- 5 Replies
- 1492 Views
-
Last post by xHeart






