The Bosch Alternator Clutch Pulley discussion
-
cn90
- Posts: 8251
- Joined: 31 March 2010
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Has thanked: 4 times
- Been thanked: 466 times
I used to own 1998 S70, 1998 V70...those P80 runs in solid pulley and some of those cars go to 300K miles...
What I am getting at is: the free-wheeling pulley lifespan is probably 50K-60K miles from my web reading...this happens bc the grease dries out and you have no way to grease it during its lifespan.
So....many of us are probably driving around with seized pulley without knowing...
What some ppl described of shredded serp belt is from seized bearing (inside the alternator) and not from seized pulley free-wheeling mechanism.
What I am getting at is: the free-wheeling pulley lifespan is probably 50K-60K miles from my web reading...this happens bc the grease dries out and you have no way to grease it during its lifespan.
So....many of us are probably driving around with seized pulley without knowing...
What some ppl described of shredded serp belt is from seized bearing (inside the alternator) and not from seized pulley free-wheeling mechanism.
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
-
cn90
- Posts: 8251
- Joined: 31 March 2010
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Has thanked: 4 times
- Been thanked: 466 times
Also,
If you look at FCP Euro website for 2004 S60, these are options, go figure...
- 120A...AL0756...solid pulley
- 140A...AL0820...free-wheeling pulley
- 160A...AL0873...free-wheeling pulley
If you look at FCP Euro website for 2004 S60, these are options, go figure...
- 120A...AL0756...solid pulley
- 140A...AL0820...free-wheeling pulley
- 160A...AL0873...free-wheeling pulley
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
-
georgedoyle
- Posts: 2
- Joined: 16 July 2024
- Year and Model: 2021 Volvo XC40
- Location: United States
Are these available for 3.9 liter cummins diesels with AC Delco alternators? The belts bounce around and of course the alternator squeals at shut down.. These make so much sense.
Last edited by georgedoyle on 21 Jul 2024, 11:38, edited 1 time in total.
- pgill
- Posts: 798
- Joined: 27 August 2018
- Year and Model: 2010 S80, 2008 LR2
- Location: California
- Has thanked: 115 times
- Been thanked: 185 times
George,
I don't have any experience working on Cummins Diesels.
If I were you I would search the forum to see if newer design incorporate the overdrive pulley and then look to see if you can upgrade.
I will look around and post more information if I can find it.
Good luck
Paul
I don't have any experience working on Cummins Diesels.
If I were you I would search the forum to see if newer design incorporate the overdrive pulley and then look to see if you can upgrade.
I will look around and post more information if I can find it.
Good luck
Paul
-
- Similar Topics
- Replies
- Views
- Last post






