Login Register

volvo 850 kicks back on hot start

Post Reply
JimBee
Posts: 1938
Joined: 09 Dec 2008, 21:23
Year and Model: 93 and 2 96 850's
Location: Minneapolis
Has thanked: 33 times
Been thanked: 43 times

Post by JimBee »

Starts right away when cold, or cooled somewhat for up to 1/2 hour after running.
But immediate start when hot or warm, engine kicks back, almost as if the timing is too advanced. Once started, the engine runs fine.

I worked a lot with small farm engines back in the day. If an engine preignited when you cranked it (pulled the rope, turned a crank handle), the engine would kick back. (Model T Fords apparently were infamous for dislocating thumbs if the spark lever was too advanced). My hot start issue seems like that.

Since cold start isn't a problem I don't suspect ignition parts, but ignition timing does seem to be an issue. I haven't changed the timing belt since maybe 20,000 miles and the problem hasn't occurred until recently, so I'm not sure what to suspect. I did upgrade the spark plug wires, that didn't change anything.

User avatar
volvolugnut
Posts: 6502
Joined: 19 Jan 2014, 09:51
Year and Model: 2001 V70
Location: Oklahoma USA
Has thanked: 987 times
Been thanked: 1075 times

Post by volvolugnut »

I would also suspect a timing issue. Get out the timing light?
volvolugnut
The Fleet:
Volvo: 2001 V70 T5, 1986 244DL, 1983 245DL, 1975 245DL, 1959 PV544, multiple Volvo parts cars.
Mercedes: 2001 E320, 1973 280, 1974 280C, 1989 300E, 1988 300TE, 1979 300TD, parts cars.
2009 Smart Passion
Ford: 1977 F350, 1964 F150 (2), 1938 Tudor Sedan
Farmall tractors: 1956 400 Diesel, 1946 A
John Deere 214 lawn tractor about 1977 model
And others.

JimBee
Posts: 1938
Joined: 09 Dec 2008, 21:23
Year and Model: 93 and 2 96 850's
Location: Minneapolis
Has thanked: 33 times
Been thanked: 43 times

Post by JimBee »

hmm timing light. I do have one...somewhere. I think my first cut on this will be to have a look at the topside belt pulleys to be sure their marks align with the notches in pulley cover. I'm pretty sure I reused the belt tensioner when I changed the belt. The mark alignments should confirm if it's correct.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post