Login Register

Intake VVT Questions 2008 XC70

Third generation Volvo V70 wagon and XC70, and second generation S80. Are you an owner? Prospective owner? Get in here and join us! Start a new topic or comment on an existing thread.

2008-2016 V70
2008-2016 XC70
2007-2016 S80

Post Reply
goudgoud
Posts: 5
Joined: 9 September 2024
Year and Model: 2008 XC70
Location: Indianapolis
Been thanked: 1 time

Intake VVT Questions 2008 XC70

Post by goudgoud »

Hi, I have a error code for my intake VVT solenoid. I have done quite a bit of research however I have some questions. I see two completely different replacement parts, some sites simply describe both as VVT solenoid however I found one site that says intake for the longer part and exhaust for the shorter. My question is I can find zero information, youtube video's etc differentiating these two parts nor can I find information on locating the specific parts on the motor. All I found was the location of the two exhaust solenoids on top of the motor by intake manifold located on the left and right side. Where do the intake solenoids sit and what's the procedure for replacing? Any help is appreciated!

goudgoud
Posts: 5
Joined: 9 September 2024
Year and Model: 2008 XC70
Location: Indianapolis
Been thanked: 1 time

Post by goudgoud »


goudgoud
Posts: 5
Joined: 9 September 2024
Year and Model: 2008 XC70
Location: Indianapolis
Been thanked: 1 time

Post by goudgoud »

anyone have any insights please?

User avatar
pgill
Posts: 799
Joined: 27 August 2018
Year and Model: 2010 S80, 2008 LR2
Location: California
Has thanked: 115 times
Been thanked: 185 times

Post by pgill »

What code are you getting?
The Intake has Variable Valve timing and Variable Valve lift.

Variable Valve Timing (1 solenoid per engine)
https://landroverforums.com/forum/lr2-35/p...le-113192/
30731116, Volvo
31251224, Volvo
36002690, Volvo
7G9N9M424AA, FORD
LR011224 LAND ROVER


Variable Valve Lift (2 solenoids per engine)
LR025967 Land Rover
31216281 Volvo

The 3.2 is shared with Land Rover

Take a look at these links

https://www.freel2.com/forum/topic39176.html

https://www.freel2.com/forum/topic38702 ... ight=p0016


Good luck

Paul

goudgoud
Posts: 5
Joined: 9 September 2024
Year and Model: 2008 XC70
Location: Indianapolis
Been thanked: 1 time

Post by goudgoud »

Thanks for the links, the code is ECM-P003D00. Can you help me identify the correct part and more importantly where on the engine it goes? Thanks

User avatar
pgill
Posts: 799
Joined: 27 August 2018
Year and Model: 2010 S80, 2008 LR2
Location: California
Has thanked: 115 times
Been thanked: 185 times

Post by pgill »

https://www.swedespeed.com/threads/whic ... 3d.644591/

If it is the variable vale lift then (note: there are two)

Image

Good luck

Paul

goudgoud
Posts: 5
Joined: 9 September 2024
Year and Model: 2008 XC70
Location: Indianapolis
Been thanked: 1 time

Post by goudgoud »

Replaced the part, took < 5 minutes and part was $60, local shop wanted $280. Check engine is now off and idle is smooth, thanks all for your input!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post