2003 Volvo V70 XC clunking noise
-
Millikesse2001
- Posts: 1
- Joined: 11 September 2024
- Year and Model: Volvo R-Design 2020
- Location: LV
2003 Volvo V70 XC clunking noise
I have a 2003 Volvo V70 XC with the 2.4l i5, I've noticed when driving it sometimes it makes clunks from either side of the front end when going over bumps, but its not reliable, sometimes it does it some times it doesn't. I just got the car and don't know where to look to see if anything is worn out or needs replaced or if this is just a sound a 21 year old car is going to make and that's all its going to be.
- matthew1
- Site Admin
- Posts: 14484
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2660 times
- Been thanked: 1248 times
- Contact:
See this thread viewtopic.php?p=563889&hilit=spring+seats+test#p563889 and the video in it. Sounds like bad spring seas or strut mounts.
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post

- BlackBart
- Posts: 6507
- Joined: 10 December 2016
- Year and Model: 2004 XC70 BlackBetty
- Location: Over the far far mountains
- Has thanked: 927 times
- Been thanked: 885 times
I have a clunk in the front left corner ('04 XC). Over big bumps or drops, like RR tracks. Sometimes random. It has new struts and seats, it has new control arms, ball joints, and sway bar end links. But something in there is making a clunk - very annoying. I'm having it aligned next week, so I'll have trained eyes look over the components for a source.
I also have all new subframe bushings in a box ready to go on - I don't know if slop in the subframe mount would cause a clunk.
I also have all new subframe bushings in a box ready to go on - I don't know if slop in the subframe mount would cause a clunk.
ex-1984 245T wagon
1994 850T5 wagon
2004 XC70 wagon BlackBetty
1994 850T5 wagon
2004 XC70 wagon BlackBetty
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 1390 Views
-
Last post by abscate
-
- 4 Replies
- 2164 Views
-
Last post by RockpileUK






