part removal query

ptV70 · Post by **ptV70** » 22 Sep 2024, 09:40

I replaced the passenger side front door lock assembly on a 2005 V70 yesterday. On reassembly found the triangular plastic cover over the side view mirror bolts (interior cover) has 2 of 3 pins broken off, and the door itself is missing one of the three metal tubes that the cover pins snap into. I want to replace the missing tube, and get a cover, from my local salvage yard. My question: How to remove those metal tubes and reuse. Thank you.

Post by **jonesg** » 22 Sep 2024, 10:30

ptV70 wrote: ↑22 Sep 2024, 09:40 I replaced the passenger side front door lock assembly on a 2005 V70 yesterday. On reassembly found the triangular plastic cover over the side view mirror bolts (interior cover) has 2 of 3 pins broken off, and the door itself is missing one of the three metal tubes that the cover pins snap into. I want to replace the missing tube, and get a cover, from my local salvage yard. My question: How to remove those metal tubes and reuse. Thank you.

remove the side mirror, on mine the pins are black plastic.
I glued the trim in place with goop.

ptV70 · Post by **ptV70** » 22 Sep 2024, 11:55

Thank you jonesg. I did not make myself clear -- I seek to replace the metal tubes into which the triangular interior trim piece snaps; I do not want to do anything with the side mirror. Are you saying the mirror has to be removed to remove the metal tubes?

Post by **cn90** » 22 Sep 2024, 12:38

Iirc, the tiny metal tubes have prongs on the other side.
It is a press-fit kind of thing.
Just get a pair of pliers and pull it out.
Once you go to junk yard, then it will be obvious.

Post by **cn90** » 22 Sep 2024, 14:20

PN is included: 9151566, about $4-$5 at dealer.

---

: S60-Clip.jpg (50.09 KiB) Viewed 81 times

ptV70 · Post by **ptV70** » 22 Sep 2024, 15:08

Thank you! This is just what I needed!