Parts brands - OE Volvo, trusted aftermarket, and bad

Post by **Sveedy** » 24 Mar 2025, 16:22

So FCP came through on my latest order. It got to me in three days, but that included a day wasted at USPS since I have to go there to pick up boxes. Two thumbs up !

Post by **Sveedy** » 25 Mar 2025, 15:55

But then there is this. A 12" x 9" x 7" box that I had to go to the post office to pick up, that had 2 o-rings in it.
They are absolutely nuts !

Post by **Sveedy** » 25 Mar 2025, 15:55

Post by **Krons** » 25 Mar 2025, 16:40

Sveedy wrote: 25 Mar 2025, 15:55 IMG_20250325_144810590_HDR.jpg

What does a stamp for a letter cost?

Post by **abscate** » 26 Mar 2025, 00:20

Krons wrote: 25 Mar 2025, 16:40
Sveedy wrote: 25 Mar 2025, 15:55 IMG_20250325_144810590_HDR.jpg
What does a stamp for a letter cost?

We can do that but a business can’t ship merchandise in a “ letter” ' technically. One would think a small cardboard envelope would make more sense.

jsrnsis · Post by **jsrnsis** » 19 Apr 2025, 07:34

I have just seen that the Nivomat shocks for the XCs are now discontinued within the last year or two and not in stock anywhere. Clicking on the "buy again" button on FCP orders only to be taken to an error screen is now a common occurrence.

rrres · Post by **rrres** » 19 Apr 2025, 18:52

I need a brake pedal sensor. Are the aftermarkets any good?

Post by **abscate** » 19 Apr 2025, 19:56

ATE will be fine, it is OE manufacturer for Volvo

9441116 is probably the one you are after. It can be cleaned and refurbished, too, if you want to swap time for shiekels

Once you spend an hour searching brake booster sensor repair, you can appreciate how that part number search will pop it up in a second

Post by **BlackBart** » 20 Apr 2025, 08:44

RE complete front axle assemblies -
These are both new not remanufactured.

What do we all think of a TRQ axle from 1AAuto, who produce good common sense DIY repair videos.
https://www.1aauto.com/volvo-s60-v70-fr ... 73919/2004

https://www.1aauto.com/*/i/1AACV00507?u ... andrepairs

“Lifetime warranty”

And the NAPA “Premium CV Axle”
https://www.napaonline.com/en/p/NCV949135
“ manufactured in our state-of-the-art ISO 9001:2015 and IATF 16949.2016 facility”

Then keep my original GKN axle, rebuild with new joints in anticipation of replacing said low-cost axle when the time comes.

jsrnsis · Post by **jsrnsis** » 21 Apr 2025, 10:10

BlackBart wrote: 20 Apr 2025, 08:44 RE complete front axle assemblies -
These are both new not remanufactured.

What do we all think of a TRQ axle from 1AAuto, who produce good common sense DIY repair videos.
https://www.1aauto.com/volvo-s60-v70-fr ... 73919/2004

https://www.1aauto.com/*/i/1AACV00507?u ... andrepairs

“Lifetime warranty”

And the NAPA “Premium CV Axle”
https://www.napaonline.com/en/p/NCV949135
“ manufactured in our state-of-the-art ISO 9001:2015 and IATF 16949.2016 facility”

Then keep my original GKN axle, rebuild with new joints in anticipation of replacing said low-cost axle when the time comes.

I have never had a problem with aftermarket axles but have opted to redo the outer joints just to save money in a few cases. If the axle is already clicking, it might be too late. I had an axle that had already worn divots in the retaining cage or whatever the official term for it is. No idea how long the car had been driving on the axle with a torn boot but I'm assuming it was an original axle with 120K miles on it.