Login Register

Shark Fin Antenna Removal

Post Reply
Steve H
Posts: 89
Joined: 15 Feb 2016, 12:27
Year and Model: 2008 S60 2.5T & XC70
Location: NC
Has thanked: 6 times
Been thanked: 10 times

Post by Steve H »

Has anyone had to remove the roof shark fin antenna to replace the double stick seal? Am I correct you can use dental floss to cut it free and remove and reseal it without any removal or dropping down the headliner? Thanks for your help.

Ciceroba
Posts: 1
Joined: 19 Mar 2022, 18:05
Year and Model: 2008 s80
Location: Colorado

Post by Ciceroba »

Hey I’m having the same issue now and see you never got any replies did you ever end up just going for it or?

Steve H
Posts: 89
Joined: 15 Feb 2016, 12:27
Year and Model: 2008 S60 2.5T & XC70
Location: NC
Has thanked: 6 times
Been thanked: 10 times

Post by Steve H »

I ended up taking the easy way out and using clear windshield sealer to go around the shark fin. No leaking since.

waligomes
Posts: 1
Joined: 17 May 2025, 18:38
Year and Model: 2013 C70
Location: Florida
Been thanked: 1 time

Post by waligomes »

Old post, but my new problem. . Braided fishing line tied around a couple of pencils makes a fine garrot for cutting the seal. Pulling and sawing gently got it done. You really don't have to pull very hard. I'm mounting a backup cam in the unused satellite radio antenna spot

aradoarado
Posts: 1
Joined: 20 May 2025, 02:51
Year and Model: 2025
Location: paris

Post by aradoarado »

Hey! Yep, you can usually use dental floss or fishing line with WD-40 to cut the double-stick seal and remove the shark fin antenna without dropping the headliner. Clean, reapply 3M tape or silicone, and reconnect. Check your car’s manual to confirm it’s not bolted. Stream ecouter les radio en ligne on Radio Gratuite while working! Any bolts on yours?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post