2013 xc 60 3.2 engine mounts replacement

2forty · Post by **2forty** » 14 Jul 2025, 10:45

I am looking for procedures to replace the transmission mount, rear motor mount, and front lower torque strut mount. Did not find any repair videos.
Also has anyone used the repairsurge online repair manuals.
2013 Xc60 3.2

Thanks

xyourobob · Post by **xyourobob** » 15 Jul 2025, 09:48

I just replaced the lower transfer case/engine Mount and the upper mount (long one on top of engine) the top one was dead easy, just unbolt, remove and replace. On the lower one, you have to crawl under and use a 15mm socket on the bolts going through the brackets, the larger bolts on the other side of the bracket are welded on to the bracket, believe me that's a good tip. Then remove the 2 15mm bolts that attach it to the subframe. I put the bracket on the new motor mount then slid it into position. I haven't replaced the other 3 mounts yet.

2forty · Post by **2forty** » 15 Jul 2025, 17:05

Thank you!

Post by **Krons** » 15 Jul 2025, 18:08

This one?

2forty · Post by **2forty** » 17 Jul 2025, 16:28

Thank you!
Still looking on how two replace the other two.