Installing pre-heat and heat shield 1991 240 sedan

Flyingdutchman · Post by **Flyingdutchman** » 27 Aug 2025, 07:19

Hello all!!
First post here. I hope I’m in the right forum section. I’ve just replaced my exhaust manifold and down pipe but I was told the pre-heat shield and heat shields are toast.
I believe I’ve got the correct replacement shields but I’m looking for information on hardware needed as well as a small tutorial on how to do this myself.
I hope that I can attach a photo of the shields I purchased. Also..is there a flexible metal hose liner too that’s needed…? Novice here…if we can keep it as simple as possible that would be great!!
Thank you all for any help…

Vova585 · Post by **Vova585** » 28 Aug 2025, 20:44

The best I can find. Look at around 3:35 it will have it shown..

Vova585 · Post by **Vova585** » 28 Aug 2025, 20:48

Sorry, never had 240 personally.
The best I can find. Look at around 3:35 it will have it shown..
You can always message Yuriy through yootube.

Flyingdutchman · Post by **Flyingdutchman** » 29 Aug 2025, 02:05

Vova585!
Thank you for responding to this thread for me. I did see the heat shields quickly in the video and see that they are secured by a few nuts. When I get under the car I will know if the hardware is already present or will have to get some. Thank you for your help. Mike