Sticky buttons broken mounting plastic F to C swap

[darylrobert]

To change your ECC from F to C is easy, just unclip the face plate. To remove and clean sticky buttons properly (i used chemicals),first remove electronics PCB,it comes out with the temp sensor (needs a good pull). Then press the buttons with a large screwdriver from the back. Do not try and do this for the buttons, the white sliding tabs will break.I found prising with a screwdriver from the front got them out unscratched and unbroken (see pic 2)

update F to Celsius

broken ecc 1.jpg (81.86 KiB) Viewed 151 times

removing sticky buttons

This passengers LHD temp knob is broken, still works but knob lost its notching and had severe wobbles

LHD temp knob broken

temp knob broken.jpg (51.09 KiB) Viewed 150 times