Recurring P0101

[hu5ker555]

Whoa, now we're getting somewhere. Sounds like I might need to take it somewhere to have the preload set properly.

[abscate]

Just replace the hose first. It’s the fatter one that runs to the intake manifold that pulls the turbo off, not the thin one going to the turbo control valve.

[hu5ker555]

I replaced the snorkel and hoses today. Smoke seems to be coming from the base of the wastegate actuator.
Seem like you can get a new wastegate actuator for about $100. Remove heat shields, remove pin and disconnect actuator arm, remove two bolts holding the actuator onto the turbo unit, and pull off the little rubber hose. Sound about right?