Is it just a bad tie rod end on both sides? Please don’t say it’s the rack. It’s going to the wrecker immediately if I need to put a 4th steering rack into it.
Tie Rod? Or Rack? 04 S60 2.4 Topic is solved
-
br0dy519
- Posts: 798
- Joined: 17 Dec 2019, 17:46
- Year and Model: 2004 XC70
- Location: Windsor, ON
- Has thanked: 132 times
- Been thanked: 126 times
Oil change and tire rotation on both cars yesterday. My s60 has been having a knock noise after accelerating from a stop. This is the only noise I could reproduce under the car.
Is it just a bad tie rod end on both sides? Please don’t say it’s the rack. It’s going to the wrecker immediately if I need to put a 4th steering rack into it.
Is it just a bad tie rod end on both sides? Please don’t say it’s the rack. It’s going to the wrecker immediately if I need to put a 4th steering rack into it.
04s60 2.4
04xc70 2.5t
04xc70 2.5t
prwood wrote:I wish I had a permanent car repair area that was covered, had a level surface, lighting and fans, a workbench, and tool cabinets. You know,like a garage. Much of my time during the job is spent hauling things up and down the stairs to the basement or in and out of the storage shed, or running back downstairs when I realize I need something else,or taking a break from standing out in the sun,or using flashlights or work lamps when it gets dark.
-
br0dy519
- Posts: 798
- Joined: 17 Dec 2019, 17:46
- Year and Model: 2004 XC70
- Location: Windsor, ON
- Has thanked: 132 times
- Been thanked: 126 times
Both the nut holding it to the knuckle and the the jam nut against the inner rod are tight. I think the joint has just failed incredibly I suppose.
Seems odd as these were just replaced about 3 years ago. Guessing I need both outer and inner tie rods?
Seems odd as these were just replaced about 3 years ago. Guessing I need both outer and inner tie rods?
04s60 2.4
04xc70 2.5t
04xc70 2.5t
prwood wrote:I wish I had a permanent car repair area that was covered, had a level surface, lighting and fans, a workbench, and tool cabinets. You know,like a garage. Much of my time during the job is spent hauling things up and down the stairs to the basement or in and out of the storage shed, or running back downstairs when I realize I need something else,or taking a break from standing out in the sun,or using flashlights or work lamps when it gets dark.
-
erikv11
- Posts: 11912
- Joined: 25 Jul 2009, 14:03
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 311 times
- Been thanked: 817 times
What you're really looking for is evidence of play in the ball joint, especially up and down play, but those outer tie rod ends should not be that floppy at the ball joint. Outers need replacing.
The video doesn't tell us anything about the inners. Rock the wheel back and forth and see if there is any in-out play at the rack end. Probably the inners are fine, unless they are the same low quality as those outers that only lasted three years.
No evidence of bad rack, I'd deal with the tie rod ends first.
The video doesn't tell us anything about the inners. Rock the wheel back and forth and see if there is any in-out play at the rack end. Probably the inners are fine, unless they are the same low quality as those outers that only lasted three years.
No evidence of bad rack, I'd deal with the tie rod ends first.
'95 854 T-5R, Motronic 4.4, 185k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
-
scot850
- Posts: 15492
- Joined: 05 Apr 2010, 14:46
- Year and Model: 2000 V70 R
- Location: Calgary, Alberta, Canada
- Has thanked: 2200 times
- Been thanked: 1852 times
Those inner tie rods look like they are both loose. I'd try disconnecting the boot at the inner of the inner tie-rod and see if they are moving when you twist the tie-rods like in you video. Either that or the inner end of the tie rods have ball socket have worn out.
Neil.
Neil.
2006 V70 2.5T AWD Polestar tune
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
2000 V70 R - still being an endless PITA
2006 XC70 - Our son now has this and still parked in our garage
2003 Toyota 4Runner V8 Limited
2015 Kia Sportage EX-L - Sold
1993 850 GLT -Sold
1998 V70 XC - Sold
1997 Volvo 850 SE NA - Went to niece in California - Sold
2000 V70 SE NA - Sold
-
br0dy519
- Posts: 798
- Joined: 17 Dec 2019, 17:46
- Year and Model: 2004 XC70
- Location: Windsor, ON
- Has thanked: 132 times
- Been thanked: 126 times
Thank you guys. Yes I always check my ball joints as I have replaced them like 3 times too. Prybar against the knuckle to check for up/down play.
The tie rods were MOOG and thus are warranty so I will replace both inners and outers.
The tie rods were MOOG and thus are warranty so I will replace both inners and outers.
04s60 2.4
04xc70 2.5t
04xc70 2.5t
prwood wrote:I wish I had a permanent car repair area that was covered, had a level surface, lighting and fans, a workbench, and tool cabinets. You know,like a garage. Much of my time during the job is spent hauling things up and down the stairs to the basement or in and out of the storage shed, or running back downstairs when I realize I need something else,or taking a break from standing out in the sun,or using flashlights or work lamps when it gets dark.
-
erikv11
- Posts: 11912
- Joined: 25 Jul 2009, 14:03
- Year and Model: 850, V70, S60R, XC70
- Location: Iowa
- Has thanked: 311 times
- Been thanked: 817 times
FWIW, my post refers only to the ball joint on the tie rod end, not the control arm ball joint.
'95 854 T-5R, Motronic 4.4, 185k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
'98 V70, T5 tune-injectors-turbo, LPT engine, 304k, daily driver
'06 S60 R, 201k
'07 XC70, black, 205k
'07 XC70, willow green, 223k
gone: '96 NA 850 210k, '98 NA V70 182k, '98 S70 NA 225k, '96 855 NA 169k
-
abscate
- MVS Moderator
- Posts: 36149
- Joined: 17 Feb 2013, 17:54
- Year and Model: 99: V70s S70s,05 V70
- Location: Port Jefferson Long Island NY
- Has thanked: 1610 times
- Been thanked: 4067 times
I’ve had tie rod ends that move easily on the ball with no longitudinal play, which is most important. The tie rods have to pivot on the ball to articulate as you steer. Those tie rod ends might still have service life in them.
Empty Nester
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
A Captain in a Sea of Estrogen
1999-V70-T5M56 2005-V70-M56 1999-S70 VW T4 XC90-in-Red
Link to Maintenance record thread
-
- Similar Topics
- Replies
- Views
- Last post