installing a new reluctor ring on the driver side axle shaft I think the inner joint has gone out of position,
it flexes one way but binds in the other direction.
Its removed from the car now, is there any way to rescue the situation or does it need to come apart.?
If it needs to come apart do I need to order the big clamp plus the cinch tool pliers ?
04 v70 awd front axle cv joint popped out
-
RickHaleParker
- Posts: 7195
- Joined: 25 May 2015, 14:30
- Year and Model: See Signature below.
- Location: Kansas
- Has thanked: 8 times
- Been thanked: 977 times
It need to come apart or be replaced. Something in the inter CV joint is broken or jammed. Most likely a broken cage but could be debris jamming it. Either way it need to come apart or replace it.
Active
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
2017 Ford PIU. 3.5l, Twin Turbo, 365 Hp.
............................
Past
2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. ( Killed by a plastic radiator. )
2004 S60R, B8444S TF80 AWD. Yamaha V8 conversion ( I moved, the project did not )
2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0. ( Transmission dead after sitting for a winter )
-
jonesg
- Posts: 3697
- Joined: 16 Jan 2008, 15:25
- Year and Model: 2004 V70
- Location: Northern maine.
- Has thanked: 73 times
- Been thanked: 532 times
ok, I just ordered clamps and plier tool....and grease.RickHaleParker wrote: 03 Aug 2026, 15:57 It need to come apart or be replaced. Something in the inter CV joint is broken or jammed. Most likely a broken cage but could be debris jamming it. Either way it need to come apart or replace it.
I'm going to take it apart and have a see.
-
jonesg
- Posts: 3697
- Joined: 16 Jan 2008, 15:25
- Year and Model: 2004 V70
- Location: Northern maine.
- Has thanked: 73 times
- Been thanked: 532 times
I pulled the boot back, nothing broken, no debris, just seems out of position. One roller wheel is jammed.
When I pulled the shaft from the tranny it fell on the floor. duh.
I will try to persuade it with a machinists dead blow.
When I pulled the shaft from the tranny it fell on the floor. duh.
I will try to persuade it with a machinists dead blow.
-
cn90
- Posts: 8358
- Joined: 31 Mar 2010, 09:54
- Year and Model: 2004 V70 2.5T
- Location: Omaha NE
- Has thanked: 4 times
- Been thanked: 504 times
The Tripod CUP has stakes to hold the joint in place.
Look carefully, you will see the factory stakes on the CUP itself.
Either file the stakes a bit or stand it up and use rubber hammer to drive it in.
At factory, they install the tripod then used a staking tool to create a stake.
Look carefully, you will see the factory stakes on the CUP itself.
Either file the stakes a bit or stand it up and use rubber hammer to drive it in.
At factory, they install the tripod then used a staking tool to create a stake.
2004 V70 2.5T 100K+
2005 XC90 2.5T 110K+
2005 XC90 2.5T 110K+
-
jonesg
- Posts: 3697
- Joined: 16 Jan 2008, 15:25
- Year and Model: 2004 V70
- Location: Northern maine.
- Has thanked: 73 times
- Been thanked: 532 times
Ahh yes , got it, thanks. Just have to wait on the clamp now.cn90 wrote: 03 Aug 2026, 19:24 You can see the stakes in the thread below...
https://www.swedespeed.com/threads/07-i ... ly.602391/
-
firstv70volvo
- Posts: 575
- Joined: 06 Mar 2010, 08:37
- Year and Model: V70 T5 2001
- Location: Sacramento, CA
- Has thanked: 52 times
- Been thanked: 123 times
jonesg wrote: 03 Aug 2026, 18:55 I got it apart but it will not re-assemble again, I want to trial fit before greasing it up.
is there a trick?
S
- Inkedvolvo inner cv joint staked end_LI.jpg (65.46 KiB) Viewed 687 times
-
- Similar Topics
- Replies
- Views
- Last post