Broken connector 97 850 NA

Post by **januwan** » 23 Aug 2026, 16:06

While fixing my PCV problem, I messed up this connector. What is the proper name for this device? Is it a DIY job?
Any guidance greatly appreciated.

: connector_2.jpeg (38.81 KiB) Viewed 991 times

Post by **januwan** » 23 Aug 2026, 17:55

It's the camshaft position sensor, but where can I get a male and female connector? Does anybody know the PN for both?

Post by **januwan** » 23 Aug 2026, 19:11

I found this one https://www.partsgeek.com/z9mv19n-volvo ... AgQAvD_BwE
Anybody tried Walker?

Post by **misha** » 24 Aug 2026, 05:18

I would go with Bosch...or at least Delphi.

Connectors,unfortunately,are not sold separately.

What i would do in this case.....is that i would buy a cheapest sensor and use it's connector on the original one.

Post by **Olegs855R** » 24 Aug 2026, 15:19

My son bought a MBZ C55 AMG we started working on it and found the AMG air filter housing was glued onto the throttle body with ELMERS GLITTER GLUE so I say get some crazy glue and carefully slide the pins back in their slots and glue the base back together. Once dry snap it into the connector and TADA!
Winner winner, chicken dinner!

Post by **Olegs855R** » 24 Aug 2026, 15:23

januwan wrote: 23 Aug 2026, 16:06 While fixing my PCV problem, I messed up this connector. What is the proper name for this device? Is it a DIY job?
Any guidance greatly appreciated.connector_2.jpeg

Pick n pull for a “new to you” sensor
Or
Electronics store and buy any 3 wire connectors (male and female) and replace

Post by **Olegs855R** » 26 Aug 2026, 02:01

O’Reilly‘s auto parts