P80 trapezoidal frame plate stiffener under car, part number 9133420 Topic is solved

Post by **abscate** » 14 Sep 2026, 07:35

Looking for part numbers for these two

Fwd just a plate

Awd/R has plate and bearing mounting fixture plus bolt holes

Found them on diagrams but no part numbers…#15 here

Post by **scot850** » 14 Sep 2026, 19:23

Based on your drawing, it would be #18 and #19 for AWD cars possibly?

https://www.volvocarstorontoparts.ca/a/ ... 76564.html

Neil.

Post by **abscate** » 16 Sep 2026, 13:10

And those links are now safe from cia meddling thanks to image storing here ….

Fwd still available 9133420 ?

Post by **scot850** » 16 Sep 2026, 14:23

It is not listed as not-available from the website. It also shows it priced which often they don't do if it can't be ordered:

https://www.volvocarstorontoparts.ca/p/ ... 33420.html

I just want to be sure we are talking the correct part you are looking for/at. Are you looking for a cross member under the car or a cover plate under the car?

Neil.

Post by **abscate** » 16 Sep 2026, 15:19

Cross me,her under the car

It’s 9133420

rocks

VWAudirally · Post by **VWAudirally** » 18 Sep 2026, 06:43

9474483 MSRP $172.55 Discontinued by Volvo

viewtopic.php?t=100392

https://usparts.volvocars.com/p/Volvo__ ... 74483.html

https://www.skandix.de/en/spare-parts/b ... l/1032474/

Post by **scot850** » 18 Sep 2026, 08:49

That part number is showing as retired.

I have asked my contact at Volvo parts to investigate if the other part number I listed a link for is actually available. It is showing as discontinued now at GCP.se

Neil.

Post by **scot850** » 18 Sep 2026, 09:42

Just got an answer from my Volvo dealer contact. Part is NLA from them. Maybe worth contacting Volvo direct. I did this once and they found me the parts in Australia.

Sorry, but the website had not been updated it looks like.

Neil.

Post by **scot850** » 19 Sep 2026, 08:32

Ok, this has been bugging me. For the life of me I cannot picture where on the underside these plates fit. I've tried to find pictures on the underside of P80's but no luck finding any of where these are fitted.

What is the purpose and can someone post where they are fitted so if I do a junkyard run I know where to look for non-crusty ones?

Thanks,

Neil.

Post by **abscate** » 19 Sep 2026, 09:28

Right under the cat at its rear end. There are four bolts in the frame, M8, and it bolts ip there.

Flat plate on the FWD

AWD cars this plate also has a raised member and bolt holes for the driveshaft bearing