I have had a slight "clunking" noise in the right front that has gotten progressively worse over the past week. It appears to be a worn rear control arm bushing. I ordered all 4 front lower control arm bushing from FCP GROTON. It would be stupid to replace just the "bad" one!!
My question......do these have to be mechanically pressed out and in or can they be muscled and hammered?
00 S80 lower control arm bushing replacement
-
wolfspiritky
- Posts: 268
- Joined: 11 February 2008
- Year and Model:
- Location: Louisville, KY.
-
billofdurham
- MVS Moderator
- Posts: 6507
- Joined: 2 February 2006
- Year and Model: 855, 1995
- Location: Durham, England
- Been thanked: 5 times
VADIS shows a hydraulic press with various attachments to ensure the new bushing is at the right depth and angle.
Bill.
Bill.
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 1892 Views
-
Last post by Kazthebassman
-
- 3 Replies
- 1575 Views
-
Last post by Lewis