Important Information on Ecu issues (850,S70 series)

5sobs5 · Post by **5sobs5** » 06 Dec 2008, 08:59

Anybody. How do I remove that diagonal metal strap so I Can open the module box?

meteg · Post by **meteg** » 06 Dec 2008, 16:47

the diagonal metal strap is something we dont have in the european volvo models.I guess its only available in U.S market models. my car is a european version and has no metal strap on it.

note: the ecu's need no reprogramming after removal.. the only matter is you have to switch the ignition off and wait least 10 mins until all the power to the control modules are cut. and then remove the modules from the box.otherwise damage to the ecu modules is possible.

5sobs5 · Post by **5sobs5** » 07 Dec 2008, 12:45

Please. There must be somebody out there that can help me. I've already broken part of the support for the windshield fluid fill tube. Now in trying to force the metal strap off, I can see it slight crack just starting at the bottom of the box by the strap. I could really use someone insight and knowledge on how they opened their's.

Post by **JRL** » 07 Dec 2008, 13:42

meteg wrote:
the only matter is you have to switch the ignition off and wait least 10 mins until all the power to the control modules are cut.

No you don't.
I have swapped ECU's and it's an in and out deal even with the battery connected, no issues

Mr Vince · Post by **Mr Vince** » 17 Jan 2010, 20:47

I would like to remove my ECU and Transmission control modules .can some one let me know the procedure ?
thanks Vince

Toplights · Post by **Toplights** » 18 Jan 2010, 04:21

My car is registered in the uk and did have a strap over the top of it, i removed mine with an angle grinder and great care.

Post by **misha** » 18 Jan 2010, 17:20

meteg wrote:the diagonal metal strap is something we dont have in the european volvo models.I guess its only available in U.S market models. my car is a european version and has no metal strap

I have european model and i have that metal strap on top of ecu box.

cread · Post by **cread** » 01 Apr 2011, 06:50

so remove using instructions provided earlier and i can clean using electrical contact cleaner to clean deposits ?

bobsnow100 · Post by **bobsnow100** » 01 Apr 2011, 07:11

You can get a big spray can of Electrical contact cleaner at Home Depot in the Electrical Department.

cread · Post by **cread** » 01 Apr 2011, 10:46

yeah i have a can, i wonder if the ECU is to blame for my issues, since replacing the starter I can turn the engine over but it never will start. Checked for spark and am not getting any. Changed plugs ,wires,cap,rotor and still no spark. I got a TPS code so I replaced that, replaced camshaft position switch, and ignition coil and still no spark HELP !!

Important Information on Ecu issues (850,S70 series)

Re: Important Information on Ecu issues (850,S70 series)