Install Keyless Entry

Post by **Ozark Lee** » 14 Feb 2009, 10:13

Schematically it used ground as the common:

http://pliki.mojevolvo.pl/volvotechinfo ... n_3_39.pdf

The server is in Poland and it is slow. Be patient for it to launch.

...Lee

Post by **tjts1** » 14 Feb 2009, 14:18

I'm not sure. I'm only really familiar with the kit I used which seemed really straight forward. Whats the model name of the kit you're using?

kaddo · Post by **kaddo** » 14 Feb 2009, 15:40

tjts1 wrote:I'm not sure. I'm only really familiar with the kit I used which seemed really straight forward. Whats the model name of the kit you're using?

It's Auto Star AS-830 (manufactured in Taiwan by Astargek)
I'm trying, but not much info that I could find on the Web.

Post by **BEJinFbk** » 15 Feb 2009, 00:16

The button should just pop out. On the back are the lock and unlock leads
along with the ground that they each need and a dash light lead.
Sounds like you've got a good handle on this bit of fun.
All you need is a ground for lock or unlock.
These PDF's may help.

96 850 wagon lock comp diagram.pdf: (150.04 KiB) Downloaded 618 times

96 850 wagon lock comp location A.pdf: (231.69 KiB) Downloaded 420 times

96 850 wagon lock comp location B.pdf: (244.55 KiB) Downloaded 428 times

kaddo · Post by **kaddo** » 15 Feb 2009, 04:56

BEJinFbk wrote:The button should just pop out. On the back are the lock and unlock leads
along with the ground that they each need and a dash light lead.
Sounds like you've got a good handle on this bit of fun.
All you need is a ground for lock or unlock.
These PDF's may help.

Many thanks for the valuable info and much needed encouragement, BEJinFbk!

Post by **BEJinFbk** » 17 Feb 2009, 11:55

No Problem. That's why we're all here, eh?

The best part is, It'll seem a lot easier once your done!

Enjoy having a remote!

kaddo · Post by **kaddo** » 17 Feb 2009, 13:30

BEJinFbk wrote:No Problem. That's why we're all here, eh?
The best part is, It'll seem a lot easier once your done!
Enjoy having a remote!

If thinking you weren't abused so far, I will try harder now.

I have a question about A/C on these cars, could you help?

Post by **Ozark Lee** » 17 Feb 2009, 14:26

I have a question about A/C on these cars, could you help?

Start a new topic with your questions.

...Lee

Post by **Matty Moo** » 20 Feb 2009, 23:51

I ordered one of these (omega REC-43T) and installed it today.

Super easy. You get your power and ground from the wires going to the headlight switch, then tap the other harness into the two lock/unlock wires going into the lock switch. I did it in about 30 minutes, and I soldered all my connections. Just mount the unit down where your wiring harnesses and relays are with some heavy zip ties, and tuck the antenna wire above the plastic trim that covers the knee bolster. Set your jumpers on the unit to "on demand", then program the remotes.

I'm getting about 25ft. of range with it. Not bad for $25.

kaddo · Post by **kaddo** » 21 Feb 2009, 04:26

fattymatty wrote:I ordered one of these (omega REC-43T) and installed it today.

Super easy. You get your power and ground from the wires going to the headlight switch, then tap the other harness into the two lock/unlock wires going into the lock switch. I did it in about 30 minutes, and I soldered all my connections. Just mount the unit down where your wiring harnesses and relays are with some heavy zip ties, and tuck the antenna wire above the plastic trim that covers the knee bolster. Set your jumpers on the unit to "on demand", then program the remotes.

I'm getting about 25ft. of range with it. Not bad for $25.

I don't suppose range is an issue with these gadgets, you did well on price, too!

Install Keyless Entry

Re: Install Keyless Entry